How to replace the Crankshaft Position Sensor on 2007 GMC Envoy?

Vehicle elevation is the first step before proceeding with Crankshaft Position Sensor replacement. Start by disconnecting the CKP sensor harness connector before uninstalling the retaining bolt to remove the engine block-mounted sensor. Check the sensor's O-ring for signs of wear or cracks or leakage before installation. If any issues are found replace the O-ring while applying engine oil for lubrication. Insert the CKP sensor into its engine block position then lock the bolt to 10 N.m (89 lb in). Reconnect the CKP sensor harness connector after you install the CKP sensor retaining bolt. Lower the vehicle then complete the Crankshaft Position System Variation Learn procedure.

OEM 2007 GMC Envoy Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2007 GMC Envoy Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 GMC Envoy Submodels:
- Denali | 8 Cyl 5.3 L GAS

2007 GMC Envoy Crankshaft Position Sensor

With a comprehensive array of OEM 2007 GMC Envoy Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 GMC Envoy Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 GMC Envoy Crankshaft Position Sensor Parts and Q&A

Q: How to replace the Crankshaft Position Sensor on 2007 GMC Envoy?
A: Vehicle elevation is the first step before proceeding with Crankshaft Position Sensor replacement. Start by disconnecting the CKP sensor harness connector before uninstalling the retaining bolt to remove the engine block-mounted sensor. Check the sensor's O-ring for signs of wear or cracks or leakage before installation. If any issues are found replace the O-ring while applying engine oil for lubrication. Insert the CKP sensor into its engine block position then lock the bolt to 10 N.m (89 lb in). Reconnect the CKP sensor harness connector after you install the CKP sensor retaining bolt. Lower the vehicle then complete the Crankshaft Position System Variation Learn procedure.