How to replace the lash adjusters on the right side on 2008 Buick Enclave?

If it is necessary to replace the lash adjusters on the right side, remove the relevant Camshaft(s) and rocker arms. Next, remove the adjusters and clean and inspect the Camshaft(s), rocker arm(s), and adjusters, repairing and replacing them if needed. Then, install the new adjusters, and then rocker arms, and finally Camshaft(s) with corresponding applicable. Make sure to go through the details regarding the brush cleaning and inspection of the cam shaft (part number), lash adjusters (part number), and valve rocker arms (part number) as necessary.

OEM 2008 Buick Enclave Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2008 Buick Enclave Valve Lifters, Green Line
Part Number: 12686787
$14.06 MSRP: $23.17
You Save: $9.11 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Adjuster Assembly-Hydraulic Valve Lash; Filler Cap O-Ring; Adjuster, Engine Valve Lifter; Adjuster, Engine Valve
- Replaces: 12572638, 24100005
- Condition: New
- SKU: 12686787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2008 Buick Enclave Submodels:
- Avenir, Base, Convenience, CX, CXL, Essence, Leather, Preferred, Premium | 6 Cyl 3.6 L GAS

2008 Buick Enclave Lash Adjuster

With a comprehensive array of OEM 2008 Buick Enclave Lash Adjuster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Buick Enclave Lash Adjuster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Buick Enclave Parts Questions & Experts Answers

Q: How to replace the lash adjusters on the right side on 2008 Buick Enclave?
A: If it is necessary to replace the lash adjusters on the right side, remove the relevant Camshaft(s) and rocker arms. Next, remove the adjusters and clean and inspect the Camshaft(s), rocker arm(s), and adjusters, repairing and replacing them if needed. Then, install the new adjusters, and then rocker arms, and finally Camshaft(s) with corresponding applicable. Make sure to go through the details regarding the brush cleaning and inspection of the cam shaft (part number), lash adjusters (part number), and valve rocker arms (part number) as necessary.