OEM 2008 Cadillac Escalade ESV Power Steering Cooler

2008 Cadillac Escalade ESV Power Steering Cooler Parts and Q&A

• Q: How to replace the Power Steering Cooler without hydroboost on 2008 Cadillac Escalade ESV?

  A: The procedure to change the Power Steering Cooler without hydroboost starts by removing both the fascia grille and the radiator grille reinforcement support based on the vehicle configuration. The technician will drain as much power steering fluid as possible from the reservoir prior to placing drain pans below the vehicle. Disconnect the power steering gear outlet hose from the Power Steering Cooler as well as the Power Steering Cooler hose from the Power Steering Pump. The Power Steering Cooler requires bolt removal before extraction. Set the new Power Steering Cooler onto its positioning and finish its installation through Power Steering Cooler bolts that must be tightened up to 9 n.m (80 lb in). Attach the Power Steering Cooler hose to the Power Steering Pump after which you should connect the power steering gear outlet hose to the Power Steering Cooler. Move all standing fluid and empty the drain pans before filling and performing a bleeding procedure on the power steering system. You should reinstall the radiator grille reinforcement support with the fascia grille when this equipment is present.