How to replace the harmonic balancer on 2008 Cadillac SRX?

The replacement process for the crankshaft balancer begins by taking off the A/C Compressor and power steering pump Drive Belt then continuing with generator and water pump Drive Belt removal. Rise and stabilize the vehicle before you take out the transmission bell housing inspection hole cover. Use the en-48018 (EN-48018) flywheel holding tool according to the instructions shown before you can take out the crankshaft balancer through the front air deflector opening. To start the procedure set up the crankshaft balancer before putting on the front air deflector. Reinstall the cover on the transmission bell housing inspection hole after removing the en-48018 (EN-48018) flywheel holding tool. The last steps should involve generator and water pump Drive Belt installation followed by the installation of A/C Compressor and power steering pump drive belts.

OEM 2008 Cadillac SRX Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

View related parts
2008 Cadillac SRX Crank Pulley
Part Number: 12603180
$61.01 MSRP: $104.78
You Save: $43.77 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer; Balancer, Engine Crankshaft And Camshaft Balancer
- Item Weight: 7.10 Pounds
- Item Dimensions: 9.2 x 8.5 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12603180
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS
View related parts
2008 Cadillac SRX Crank Pulley
Part Number: 12584576
$49.74 MSRP: $77.90
You Save: $28.16 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Balancer, Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Crankshaft Balance; Balancer, Engine Crankshaft And Camshaft Balancer
- Item Weight: 6.30 Pounds
- Item Dimensions: 8.3 x 7.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12584576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Cadillac SRX Submodels:
- Base | 8 Cyl 4.6 L GAS

2008 Cadillac SRX Harmonic Balancer

With a comprehensive array of OEM 2008 Cadillac SRX Harmonic Balancer, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Cadillac SRX Harmonic Balancer are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the harmonic balancer on 2008 Cadillac SRX?
A: The replacement process for the crankshaft balancer begins by taking off the A/C Compressor and power steering pump Drive Belt then continuing with generator and water pump Drive Belt removal. Rise and stabilize the vehicle before you take out the transmission bell housing inspection hole cover. Use the en-48018 (EN-48018) flywheel holding tool according to the instructions shown before you can take out the crankshaft balancer through the front air deflector opening. To start the procedure set up the crankshaft balancer before putting on the front air deflector. Reinstall the cover on the transmission bell housing inspection hole after removing the en-48018 (EN-48018) flywheel holding tool. The last steps should involve generator and water pump Drive Belt installation followed by the installation of A/C Compressor and power steering pump drive belts.