OEM 2008 Cadillac SRX Washer Reservoir

2008 Cadillac SRX Washer Reservoir Parts and Q&A

• Q: How to replace the windshield washer reservoir on 2008 Cadillac SRX?

  A: Open the hood to find and unfasten the washer solvent container cap. First take away the lower air deflector and the front bumper fascia. Begin by removing the available headlamp on passenger side for lhd vehicles or driver side on rhd vehicles. Empty solvent from the washer container before unhooking its hoses from the washer pumps and removing the electrical connector at one end. Take off the electrical connections from both washer pumps and the level sensor before unthreading the bolts from the washer container. Ease the fill neck out from the radiator support and take out the container from the car. Move the washer pumps washer level sensor and horizontal support system and the washer container cap onto the new unit. Fix the washer pumps and solvent sensor to the new box and join the bracket components after fitting the filler neck into the radiator space and locking the power connector. Attach the solvent container fasteners until they reach a torque value of 6 n.m (53 lb in). After that, put the washer hoses and electrical connectors back into their positions on the washer pumps and level sensor. Set back the headlamp assembly before placing the front bumper fascia and lower air deflector on its spot. Add a bolt at 6 n.m (53 lb in) to attach the washer solvent container filler neck to the upper tie bar before adding the washer solvent to the container then replacing the cap and closing the hood.