OEM 2008 Cadillac STS Fuel Filler Hose

2008 Cadillac STS Fuel Filler Hose Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2008 Cadillac STS?

  A: Start replacement of the fuel filler tube by first draining fuel from the tank until it sits below the level of the Fuel Filler Hose. Start by disconnecting the fuel filler tube body mounts then uninstall the right rear wheel combined with the right rear wheelhouse liner. The first step in the procedure is to disconnect the filler vent tube from the evaporative emission hose and then to separate the Fuel Filler Hose from the Fuel Tank. Finally remove the fuel filler tube brace bolt. After finishing these actions you can take out the fuel filler tube from the vehicle. When installing the new fuel filler tube position it correctly then attach the filler hose to the Fuel Tank and tighten the fuel filler tube hose clamp to 3.5 n.m (31 lb in). Positions the fuel filler tube brace bolt and tightens it to 9 n.m (80 lb in) next to installing two bolts with a torque of 3.5 n.m (31 lb in) to secure the fuel filler tube to the body. Reinstall the right rear wheelhouse liner whereas you add fuel to the tank before investigating leakage points while installing the right rear wheel and the fuel filler cap.