OEM 2008 Chevrolet Aveo Throttle Body

2008 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the throttle body assembly on 2008 Chevrolet Aveo?

  A: Starting the Throttle Body assembly replacement process begins by disconnecting two components: the negative Battery Cable and the intake air temperature sensor connector. First detach the air cleaner inlet duct from the Throttle Body before you disconnect both the electronic Throttle Body connector and the coolant hoses from this component. The Throttle Body requires its retaining bolts to be removed before you can take it out. After removal, discard the gasket. Before installation raise attention to the integrity of the sealing surfaces on the Intake Manifold by cleaning its gasket mating surface. Electronic throttle control valve removal is necessary before cleaning the Throttle Body in a cold immersion type cleaner because solvents or cleaners must never touch the electronic throttle control valve. To finish the installation put the electronic Throttle Body assembly with a new gasket and fasten its retaining nuts and bolts until they reach 15 n.m (11 lb ft). The electronic Throttle Body electrical connector requires reconnection following the installation of Throttle Body coolant hoses and attachment of the air cleaner inlet duct to the Throttle Body. The process ends with reattaching the negative Battery Cable then performing a cooling system fluid addition.