How to replace the Camshaft Position Sensor on 2008 Chevrolet Colorado?

You must disconnect the engine wiring harness electrical connector from the camshaft position (CMP) sensor to replace it. Start by removing the cmp sensor retaining bolt so you can pull out the cmp sensor from the Cylinder Head while disposing of the o-ring seal. New o-ring seal installation begins with placement and a light application of clean engine oil onto the cmp sensor. Then, install the cmp sensor into the Cylinder Head. Tighten the cmp sensor bolt to 10 n.m (89 lb in) of torque. Reconnect the engine wiring harness' electrical connector to the cmp sensor.

OEM 2008 Chevrolet Colorado Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2008 Chevrolet Colorado Camshaft Position Sensor
Part Number: 12597253
$55.60 MSRP: $112.94
You Save: $57.34 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Position Sensor; Crankshaft Sensor; Camshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.6 x 2.5 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12597253
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS

2008 Chevrolet Colorado Camshaft Position Sensor

With a comprehensive array of OEM 2008 Chevrolet Colorado Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on 2008 Chevrolet Colorado?
A: You must disconnect the engine wiring harness electrical connector from the camshaft position (CMP) sensor to replace it. Start by removing the cmp sensor retaining bolt so you can pull out the cmp sensor from the Cylinder Head while disposing of the o-ring seal. New o-ring seal installation begins with placement and a light application of clean engine oil onto the cmp sensor. Then, install the cmp sensor into the Cylinder Head. Tighten the cmp sensor bolt to 10 n.m (89 lb in) of torque. Reconnect the engine wiring harness' electrical connector to the cmp sensor.

Related 2008 Chevrolet Colorado Parts

Alternate Year Models

2007 Chevrolet Colorado Camshaft Position Sensor 2009 Chevrolet Colorado Camshaft Position Sensor