How to replace the Knock Sensor (KS) on 2008 Chevrolet Colorado?

In order to replace the knock sensor (KS), first, lift and support the vehicle in such a way that it is possible to replace the KS with its help through the wheelhouse. Relocate the left wheelhouse liner and then remove the engine wiring harness electrical connector from the KS. Next, extract KS retaining bolt and then extract KS from engine block. In the case of the installation, position the electrical terminals of the KS rearward when reinstalling same back on the engine block along with its retaining bolt, by topping up the KS bolt 25 N.m (18 lb ft). Reconnect the engine wiring harness electric connector to the KS then install the left wheelhouse liner, and finally lift the vehicle.

OEM 2008 Chevrolet Colorado Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2008 Chevrolet Colorado Knock Sensor
Part Number: 12623730
$13.47 MSRP: $25.30
You Save: $11.83 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Ignition Knock (Detonation) Sensor
- Replaces: 12570125
- Item Weight: 0.50 Pounds
- Item Dimensions: 2.7 x 2.5 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12623730
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Colorado Knock Sensor

With a comprehensive array of OEM 2008 Chevrolet Colorado Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Parts Questions & Experts Answers

Q: How to replace the Knock Sensor (KS) on 2008 Chevrolet Colorado?
A: In order to replace the knock sensor (KS), first, lift and support the vehicle in such a way that it is possible to replace the KS with its help through the wheelhouse. Relocate the left wheelhouse liner and then remove the engine wiring harness electrical connector from the KS. Next, extract KS retaining bolt and then extract KS from engine block. In the case of the installation, position the electrical terminals of the KS rearward when reinstalling same back on the engine block along with its retaining bolt, by topping up the KS bolt 25 N.m (18 lb ft). Reconnect the engine wiring harness electric connector to the KS then install the left wheelhouse liner, and finally lift the vehicle.

Related 2008 Chevrolet Colorado Parts

Alternate Year Models

2007 Chevrolet Colorado Knock Sensor 2009 Chevrolet Colorado Knock Sensor