How to replace the Clutch Slave Cylinder on 2008 Chevrolet Colorado?

The donor procedure of replacing the clutch actuator cylinder starts with the removal of the transmission in both the rwd and 4wd configurations. Then remove the 2 clutch actuator cylinder bolts and peel the clutch actuator cylinder off the input shaft bearing retainer . For installing, place the clutch actuator cylinder onto the input shaft bearing retainer and make sure to observe the fasteners notice for appropriate handling ability. Apply the 2 clutch actuator cylinder bolts - tighten them to 8 n.m (71 lb in). Finally, re-install the transmission for rwd and for 4wd.

OEM 2008 Chevrolet Colorado Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2008 Chevrolet Colorado Slave Cylinder Part Number: 24263807
$188.42 MSRP: $296.47
You Save: $108.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Clutch Actuator; Clutch Slave Cylinder; Release Bearing Assembly; Cylinder, Clutch Hydraulic Release Slave/Actuator; Cylinder, Clutch Hydraulic Release Slave
- Replaces: 24235357, 24249144, 12588219
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.4 x 4.5 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24263807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 Chevrolet Colorado Clutch Slave Cylinder

With a comprehensive array of OEM 2008 Chevrolet Colorado Clutch Slave Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Colorado Clutch Slave Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Colorado Clutch Slave Cylinder Parts and Q&A

Q: How to replace the Clutch Slave Cylinder on 2008 Chevrolet Colorado?
A: The donor procedure of replacing the clutch actuator cylinder starts with the removal of the transmission in both the rwd and 4wd configurations. Then remove the 2 clutch actuator cylinder bolts and peel the clutch actuator cylinder off the input shaft bearing retainer . For installing, place the clutch actuator cylinder onto the input shaft bearing retainer and make sure to observe the fasteners notice for appropriate handling ability. Apply the 2 clutch actuator cylinder bolts - tighten them to 8 n.m (71 lb in). Finally, re-install the transmission for rwd and for 4wd.