How to Service and Repair the Clutch Slave Cylinder on 2009 Chevrolet Colorado?

To replace the clutch actuator cylinder, it is necessary to remove the transmission from both 4wd as well as rwd. Next, remove the 2 clutch actuator cylinder bolts and detach the clutch actuator cylinder from the input shaft bearing retainer . For installation, locate the clutch actuator cylinder onto the input shaft bearing retainer and follow fastener precautions to avoid vehicle damage. Next, install the two clutch actuator cylinder bolts and tighten them to the 8 nm (71 lb in). Finally, reinstall both 4wd and rwd configurations.

OEM 2009 Chevrolet Colorado Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2009 Chevrolet Colorado Slave Cylinder Part Number: 24263807
$188.42 MSRP: $296.47
You Save: $108.05 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder, Clutch Actuator; Clutch Slave Cylinder; Release Bearing Assembly; Cylinder, Clutch Hydraulic Release Slave/Actuator; Cylinder, Clutch Hydraulic Release Slave
- Replaces: 24235357, 24249144, 12588219
- Item Weight: 2.10 Pounds
- Item Dimensions: 6.4 x 4.5 x 12.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24263807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Colorado Submodels:
- Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 Chevrolet Colorado Clutch Slave Cylinder

With a comprehensive array of OEM 2009 Chevrolet Colorado Clutch Slave Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Colorado Clutch Slave Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Colorado Clutch Slave Cylinder Parts and Q&A

Q: How to Service and Repair the Clutch Slave Cylinder on 2009 Chevrolet Colorado?
A: To replace the clutch actuator cylinder, it is necessary to remove the transmission from both 4wd as well as rwd. Next, remove the 2 clutch actuator cylinder bolts and detach the clutch actuator cylinder from the input shaft bearing retainer . For installation, locate the clutch actuator cylinder onto the input shaft bearing retainer and follow fastener precautions to avoid vehicle damage. Next, install the two clutch actuator cylinder bolts and tighten them to the 8 nm (71 lb in). Finally, reinstall both 4wd and rwd configurations.