How to replace the rear brake calipers (JL9-J55) on 2008 Chevrolet Corvette?

First inspect the fluid level in the brake master cylinder reservoir then to replace the rear brake caliper (JL9-J55). if midway between maximum-full and minimum allowable no fluid is to be removed, but if lower top up only to midway. Lift and hold the vehicle and remove the tire and wheel assembly. Secondly, remove the brake caliper inlet fitting bolt and brake hose from the caliper and throw away the two copper brake hose gaskets, which you thus have attached to the caliper or hose end. Plug the holes on the brake caliper and hose in order to prevent fluid leakage and contamination, and remove the brake caliper guide pin bolts before removing the caliper from the mounting bracket. Check the manner in which the caliper slide boots are damaged if any; Replace the slides and boots, if needs be. Mount the brake caliper back onto the mounting bracket and fix it by tightening the guide pin bolts using force of 31 N.m (23 lb ft). Unplug the job from the opening of the caliper and hose, and install the new brake hose copper gaskets as well as the brake caliper inlet fitting bolt and tighten it to a torque of 45 N.m (33 lb ft). Bleed the hydraulic brake system and then put back the tyre and wheel assembly before we introduce down the car.

OEM 2008 Chevrolet Corvette Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Calipers found

View related parts
2008 Chevrolet Corvette Caliper
Part Number: 88955505
$174.52 MSRP: $325.68
You Save: $151.16 (47%)
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper Piston; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.2 x 7.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88955505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Chevrolet Corvette Overhaul Kit, Rear Driver Side
Part Number: 19208041
$178.86 MSRP: $347.15
You Save: $168.29 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Driver Side
- Replaces: 88955504
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.9 x 7.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Rear Driver Side
Part Number: 19208040
$111.79 MSRP: $218.85
You Save: $107.06 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Driver Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 8.4 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Red, Front Driver Side
Part Number: 22799630
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 19121788, 19211015
- Item Weight: 8.20 Pounds
- Item Dimensions: 8.1 x 5.1 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22799630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Red, Front Passenger Side
Part Number: 22799631
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 19211016, 19121789
- Item Weight: 8.20 Pounds
- Item Dimensions: 8.2 x 5.3 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22799631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Red, Driver Side
Part Number: 22800575
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Replaces: 19211017, 19121802
- Item Weight: 8.50 Pounds
- Item Dimensions: 8.2 x 5.2 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22800575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Red, Passenger Side
Part Number: 22800576
$403.55 MSRP: $723.83
You Save: $320.28 (45%)
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Replaces: 19121803, 19211018
- Item Weight: 8.60 Pounds
- Item Dimensions: 8.4 x 5.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22800576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Front Passenger Side
Part Number: 19208034
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 88964165
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.1 x 9.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, Base, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Front Driver Side
Part Number: 19208033
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 88964164
- Item Weight: 5.50 Pounds
- Item Dimensions: 9.2 x 9.4 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- 427, Base, Z06, Z06 Carbon | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2008 Chevrolet Corvette Caliper, Rear Passenger Side
Part Number: 19208039
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Passenger Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.5 x 8.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

2008 Chevrolet Corvette Brake Calipers

With a comprehensive array of OEM 2008 Chevrolet Corvette Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Corvette Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Corvette Brake Calipers Parts Questions & Experts Answers

Q: How to replace the rear brake calipers (JL9-J55) on 2008 Chevrolet Corvette?
A: First inspect the fluid level in the brake master cylinder reservoir then to replace the rear brake caliper (JL9-J55). if midway between maximum-full and minimum allowable no fluid is to be removed, but if lower top up only to midway. Lift and hold the vehicle and remove the tire and wheel assembly. Secondly, remove the brake caliper inlet fitting bolt and brake hose from the caliper and throw away the two copper brake hose gaskets, which you thus have attached to the caliper or hose end. Plug the holes on the brake caliper and hose in order to prevent fluid leakage and contamination, and remove the brake caliper guide pin bolts before removing the caliper from the mounting bracket. Check the manner in which the caliper slide boots are damaged if any; Replace the slides and boots, if needs be. Mount the brake caliper back onto the mounting bracket and fix it by tightening the guide pin bolts using force of 31 N.m (23 lb ft). Unplug the job from the opening of the caliper and hose, and install the new brake hose copper gaskets as well as the brake caliper inlet fitting bolt and tighten it to a torque of 45 N.m (33 lb ft). Bleed the hydraulic brake system and then put back the tyre and wheel assembly before we introduce down the car.

Related 2008 Chevrolet Corvette Parts

Alternate Year Models

2007 Chevrolet Corvette Brake Calipers 2009 Chevrolet Corvette Brake Calipers