How to replace the front brake calipers (JL9-J55) on 2007 Chevrolet Corvette?

Start the front brake caliper (JL9-J55) replacement by examining the brake master cylinder reservoir fluid level. If it stays between maximum and minimum points without reaching the minimum setting, keep the fluid at its current position. First lift the vehicle and then take off both tire and wheel components. Release both parts of the brake caliper to take off its inlet fitting bolt and brake hose while discarding the stuck copper gaskets from the caliper and brake hose ends. Seal the brake caliper and hose ports before removing the caliper guide pin bolts to take the caliper off its base. Before assembling inspect each slide boot for damage and replace them when needed. Then secure the brake caliper onto the mounting bracket using guide pin bolts and tighten all bolts to 31 N.m. Set in place NEW copper brake hose gaskets before you put together the brake caliper inlet fitting bolt with the brake hose. Thread the brake hose and inlet fitting onto the caliper then bolt them properly. Tighten the inlet fitting bolt to 45 N.m (33 lb ft). Perform hydraulic brake system bleeding and put back the tire and wheel assembly. Lower the vehicle afterwards.

OEM 2007 Chevrolet Corvette Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Brake Calipers found

View related parts
2007 Chevrolet Corvette Caliper
Part Number: 88955505
$174.52 MSRP: $325.68
You Save: $151.16 (47%)
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper Piston; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.2 x 7.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88955505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Overhaul Kit, Rear Driver Side
Part Number: 19208041
$178.86 MSRP: $347.15
You Save: $168.29 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Driver Side
- Replaces: 88955504
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.9 x 7.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Rear Driver Side
Part Number: 19208040
$111.79 MSRP: $218.85
You Save: $107.06 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Driver Side
- Item Weight: 3.20 Pounds
- Item Dimensions: 8.4 x 7.4 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208040
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Red, Front Driver Side
Part Number: 22799630
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 19121788, 19211015
- Item Weight: 8.20 Pounds
- Item Dimensions: 8.1 x 5.1 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22799630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Red, Front Passenger Side
Part Number: 22799631
Product Specifications
- Other Name: Caliper, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 19211016, 19121789
- Item Weight: 8.20 Pounds
- Item Dimensions: 8.2 x 5.3 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22799631
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Red, Driver Side
Part Number: 22800575
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Replaces: 19211017, 19121802
- Item Weight: 8.50 Pounds
- Item Dimensions: 8.2 x 5.2 x 14.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22800575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Red, Passenger Side
Part Number: 22800576
$403.55 MSRP: $723.83
You Save: $320.28 (45%)
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Passenger Side
- Replaces: 19121803, 19211018
- Item Weight: 8.60 Pounds
- Item Dimensions: 8.4 x 5.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22800576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Front Passenger Side
Part Number: 19208034
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 88964165
- Item Weight: 5.30 Pounds
- Item Dimensions: 9.1 x 9.4 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208034
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, Base, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Front Driver Side
Part Number: 19208033
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 88964164
- Item Weight: 5.50 Pounds
- Item Dimensions: 9.2 x 9.4 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208033
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, Base, Z06, Z06 Carbon | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Caliper, Rear Passenger Side
Part Number: 19208039
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Passenger Side
- Item Weight: 3.10 Pounds
- Item Dimensions: 9.5 x 8.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS

2007 Chevrolet Corvette Brake Calipers

With a comprehensive array of OEM 2007 Chevrolet Corvette Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Corvette Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Corvette Parts Questions & Experts Answers

Q: How to replace the front brake calipers (JL9-J55) on 2007 Chevrolet Corvette?
A: Start the front brake caliper (JL9-J55) replacement by examining the brake master cylinder reservoir fluid level. If it stays between maximum and minimum points without reaching the minimum setting, keep the fluid at its current position. First lift the vehicle and then take off both tire and wheel components. Release both parts of the brake caliper to take off its inlet fitting bolt and brake hose while discarding the stuck copper gaskets from the caliper and brake hose ends. Seal the brake caliper and hose ports before removing the caliper guide pin bolts to take the caliper off its base. Before assembling inspect each slide boot for damage and replace them when needed. Then secure the brake caliper onto the mounting bracket using guide pin bolts and tighten all bolts to 31 N.m. Set in place NEW copper brake hose gaskets before you put together the brake caliper inlet fitting bolt with the brake hose. Thread the brake hose and inlet fitting onto the caliper then bolt them properly. Tighten the inlet fitting bolt to 45 N.m (33 lb ft). Perform hydraulic brake system bleeding and put back the tire and wheel assembly. Lower the vehicle afterwards.

Related 2007 Chevrolet Corvette Parts

Alternate Year Models

2006 Chevrolet Corvette Brake Calipers 2008 Chevrolet Corvette Brake Calipers