How to replace the brake line using the J 45405 Pipe Flaring Tool Kit on 2007 Chevrolet Corvette?

Use the J 45405 Kit (J 45405) to change the brake pipe and follow brake fluid safety measures plus use double-walled steel brake pipes to stop system failure. Check the new brake section before removing it from retaining devices. Select the section for cutting the brake pipe in a position that lets the J 45405 work properly and stays away from mount points and bends. Create a dimension for the new pipe that matches the actual length plus 6.35 mm (0.250 inch) for each flare connection on 4.76-mm (3/16 inch) pipes. Use the supplied pipe cutter on J 45405 to divide the brake pipe neatly before removing the portion. Choose and install the right brake pipe sizes and tube nuts before stripping nylon coating at the ends using the provided coating stripping tool from the J 45405 kit without damaging the metal surface. Fit the de-burring tool from J 45405 to trim the inside and outside pipe diameter. After that place tube nuts on both ends and make sure the tool and pipe stay free of debris before loosening the die clamping screw. Place the die parts inside the die cage and fit the prepared pipe end while tightening the screw. Use the required forming mandrel and move the J 45405 lever to create the flare. After that remove the dies and test the flare for its proper dimensions (7.10 mm (0.279 in) +/- 0.18 mm (0.007 in) measurements for 4.76 mm (3/16 in) diameter pipe). Use a suitable brake pipe bending tool to modify the new pipe while keeping a 19 mm (3/4 inch) gap between it and moving parts. Finish by installing the pipe with correct unions then attaching it to retainers after bleeding hydraulic brakes and looking for leaks under engine power and activated brakes.

OEM 2007 Chevrolet Corvette Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Lines found

View related parts
2007 Chevrolet Corvette Flex Hose, Rear Passenger Side
Part Number: 19366780
$32.06 MSRP: $58.02
You Save: $25.96 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10307426, 15802376, 20989694
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.1 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Front Passenger Side
Part Number: 19370735
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15802378, 19331543
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 2.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Rear Driver Side
Part Number: 19366781
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 10307425, 15802375, 20989693
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 2.1 x 17.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366781
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Front Driver Side
Part Number: 19366675
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15802377, 19331542
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 2.0 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366675
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Front Driver Side
Part Number: 19370737
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 19331541, 10345990
- Item Weight: 0.80 Pounds
- Item Dimensions: 25.0 x 7.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370737
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Rear Passenger Side
Part Number: 19370736
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10345989, 19331540
- Item Weight: 0.80 Pounds
- Item Dimensions: 17.2 x 4.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Rear Passenger Side
Part Number: 19366782
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 15222937, 20989695
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.1 x 17.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2007 Chevrolet Corvette Flex Hose, Rear Driver Side
Part Number: 19366783
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15222938, 20989696
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 2.1 x 17.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2007 Chevrolet Corvette Brake Line

With a comprehensive array of OEM 2007 Chevrolet Corvette Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Corvette Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Corvette Brake Line Parts Questions & Experts Answers

Q: How to replace the brake line using the J 45405 Pipe Flaring Tool Kit on 2007 Chevrolet Corvette?
A: Use the J 45405 Kit (J 45405) to change the brake pipe and follow brake fluid safety measures plus use double-walled steel brake pipes to stop system failure. Check the new brake section before removing it from retaining devices. Select the section for cutting the brake pipe in a position that lets the J 45405 work properly and stays away from mount points and bends. Create a dimension for the new pipe that matches the actual length plus 6.35 mm (0.250 inch) for each flare connection on 4.76-mm (3/16 inch) pipes. Use the supplied pipe cutter on J 45405 to divide the brake pipe neatly before removing the portion. Choose and install the right brake pipe sizes and tube nuts before stripping nylon coating at the ends using the provided coating stripping tool from the J 45405 kit without damaging the metal surface. Fit the de-burring tool from J 45405 to trim the inside and outside pipe diameter. After that place tube nuts on both ends and make sure the tool and pipe stay free of debris before loosening the die clamping screw. Place the die parts inside the die cage and fit the prepared pipe end while tightening the screw. Use the required forming mandrel and move the J 45405 lever to create the flare. After that remove the dies and test the flare for its proper dimensions (7.10 mm (0.279 in) +/- 0.18 mm (0.007 in) measurements for 4.76 mm (3/16 in) diameter pipe). Use a suitable brake pipe bending tool to modify the new pipe while keeping a 19 mm (3/4 inch) gap between it and moving parts. Finish by installing the pipe with correct unions then attaching it to retainers after bleeding hydraulic brakes and looking for leaks under engine power and activated brakes.

Related 2007 Chevrolet Corvette Parts

Alternate Year Models

2006 Chevrolet Corvette Brake Line 2008 Chevrolet Corvette Brake Line