Make sure this part fits

GM 19370735
Flex Hose, Front Passenger Side

2004-2013 GM

Customer Questions & Expert Answers (14)
GM 19370735 Flex Hose, Front Passenger Side
  • Part Description
    Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line
  • Position
    Front Passenger Side
  • Replaces
    15802378, 19331543
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac XLRBase, Platinum, V8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    2005-2013 Chevrolet Corvette427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR18 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19370735 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19370735 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is required for the installation of the new brake hose for the 2007 Cadillac XLR? Posted by Customer
    A:
    Use new copper brake hose gaskets, assemble them with the brake caliper inlet fitting bolt to the brake hose, and install this assembly to the brake caliper, tightening the bolt to 45 N.m (33 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be ensured while disconnecting the brake pipe fitting for the 2009 Cadillac XLR? Posted by Customer
    A:
    Ensure not to bend the brake pipe or bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe fitting be connected to the brake hose for the 2008 Cadillac XLR? Posted by Customer
    A:
    Use a backup wrench to connect it, tightening it to 18 N.m (13 lb ft) without bending the bracket or pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How should the brake pipe be cut for the 2004 Cadillac XLR? Posted by Customer
    A:
    Cut the brake pipe squarely using the pipe cutter included in the J 45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the new brake pipe for the 2007 Cadillac XLR? Posted by Customer
    A:
    Select the appropriate size of brake pipe and tube nuts, strip the nylon coating from the end to be flared, and chamfer the inside and outside diameter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    How can fluid loss and contamination be prevented during the process for the 2009 Cadillac XLR? Posted by Customer
    A:
    Install a rubber cap or plug on the exposed brake pipe fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done with the copper brake hose gaskets for the 2005 Chevrolet Corvette? Posted by Customer
    A:
    Discard the two copper brake hose gaskets, which may be stuck to the caliper or hose end.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What safety precautions should be followed for the 2007 Chevrolet Corvette? Posted by Customer
    A:
    Follow safety precautions regarding brake fluid irritants and use double-walled steel brake pipes to prevent system failure.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What needs to be removed from the brake hose for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    The brake hose fitting bolt and the old brake hose fitting gaskets.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What should be done after stripping the coating for the 2010 Chevrolet Corvette? Posted by Customer
    A:
    Chamfer the inside and outside diameter of the pipe with the de-burring tool from the J 45405.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the required shape and diameter for the flare for the 2008 Chevrolet Corvette? Posted by Customer
    A:
    The flare should have a shape and diameter of 7.10 mm (0.279 in) +/- 0.18 mm (0.007 in) for the 4.76 mm (3/16 in) diameter pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What is the final step in the process for the 2006 Chevrolet Corvette? Posted by Customer
    A:
    Bleed the hydraulic brake system and check for leaks by starting the engine and applying the brakes with assistance.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    Q:
    What are the final steps after replacing the rear brake hose for the 2005 Cadillac XLR? Posted by Customer
    A:
    Reinstall the tire and wheel assembly, bleed the hydraulic brake system, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Line
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Flex Hose, Front Passenger Side 19370735 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19370735 Flex Hose, Front Passenger Side is available in the market under the name GM Brake Line. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19370735 Flex Hose, Front Passenger Side fits certain Chevrolet Corvette models, as well as Cadillac XLR models.
The original GM component designated by manufacturer part number 19370735 maintains top performance when functioning as the Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line unit at its Front Passenger Side. The component 19370735 is constructed from durable material and its dimensions span 6.2 x 2.1 x 14.1 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Hydraulic Brake. The part 19370735 has available replacement options 15802378, 19331543. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.