How to replace the rear brake line on 2009 Cadillac XLR?

Start brake hose replacement by securely lifting the vehicle and placing appropriate support underneath. Take the rear tire and wheel away to sweep any dirt from both brake parts. Put on a rubber seal to the brake pipe opening to block fluid leaks and outer contamination. Securely disconnect the brake hose fitting from the Brake Line with the back up wrench while protecting both elements from bending. Detach the hose bracket retainer before removing both the brake hose and its bracket. Take out the bolt on the caliper inlet and free the brake hose from the device. Discard the two copper gaskets found in the hose. To set up the new copper brake hose gaskets you must bolt them together with brake caliper inlet fitting and brake hose. Tighten the assembly to 45 nm (33 lb ft). Secure the brake hose to the brake caliper and verify that the attached portion does not have any bends or twists before fitting it into the hose bracket. Twist on the brake hose retainer followed by removing the rubber cover from the brake pipe joint. Apply a back up wrench to attach the brake pipe joint to the brake hose and tighten until it reaches 18 nm (13 lb ft). Put back the tire and wheel parts before conducting hydraulic brake system bleeding through normal procedures.

OEM 2009 Cadillac XLR Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2009 Cadillac XLR Flex Hose, Rear Passenger Side Part Number: 19366780
$31.09 MSRP: $58.02
You Save: $26.93 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10307426, 15802376, 20989694
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.1 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Flex Hose, Front Passenger Side Part Number: 19370735
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15802378, 19331543
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 2.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Flex Hose, Rear Driver Side Part Number: 19366781
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 10307425, 15802375, 20989693
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 2.1 x 17.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366781
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Flex Hose, Front Driver Side Part Number: 19366675
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15802377, 19331542
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 2.0 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366675
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac XLR Brake Line

With a comprehensive array of OEM 2009 Cadillac XLR Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Brake Line Parts and Q&A

Q: How to replace the rear brake line on 2009 Cadillac XLR?
A: Start brake hose replacement by securely lifting the vehicle and placing appropriate support underneath. Take the rear tire and wheel away to sweep any dirt from both brake parts. Put on a rubber seal to the brake pipe opening to block fluid leaks and outer contamination. Securely disconnect the brake hose fitting from the Brake Line with the back up wrench while protecting both elements from bending. Detach the hose bracket retainer before removing both the brake hose and its bracket. Take out the bolt on the caliper inlet and free the brake hose from the device. Discard the two copper gaskets found in the hose. To set up the new copper brake hose gaskets you must bolt them together with brake caliper inlet fitting and brake hose. Tighten the assembly to 45 nm (33 lb ft). Secure the brake hose to the brake caliper and verify that the attached portion does not have any bends or twists before fitting it into the hose bracket. Twist on the brake hose retainer followed by removing the rubber cover from the brake pipe joint. Apply a back up wrench to attach the brake pipe joint to the brake hose and tighten until it reaches 18 nm (13 lb ft). Put back the tire and wheel parts before conducting hydraulic brake system bleeding through normal procedures.