How to replace the front brake calipers on 2009 Cadillac XLR?

The brake master cylinder reservoir fluid check should serve as the starting point for front brake caliper replacement. The fluid replacement amount will depend on the reservoir level position with respect to its full and minimum ranges. Before replacement start by lifting the vehicle and removing its tire and wheel assembly. The next step is to disconnect both the brake caliper inlet fitting bolt and brake hose from the caliper while throwing out the two copper brake hose gaskets that might be stuck on the caliper or hose end. Position plugs within the brake caliper and hose openings to maintain fluid integrity before removing the caliper guide pin bolts to detach the caliper from its mounting bracket. Check the caliper slide boots for all indications of damage. If necessary, replace them. Mount the brake caliper onto its bracket and apply 31 nm (23 lb ft) torque when tightening guide pin bolts. The brake caliper requires new copper gaskets to be installed on its opening and hose before fitting the hose to the inlet with a 45 nm (33 lb ft) torque specification. Bleed the hydraulic brake system first before reinstalling the tire-wheel assembly and confirming the vehicle is suitably lowered.

OEM 2009 Cadillac XLR Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Calipers found

View related parts
2009 Cadillac XLR Caliper Part Number: 88955517
$165.25 MSRP: $299.11
You Save: $133.86 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Front Passenger Side
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.5 x 9.4 x 4.2 inches
- Condition: New
- SKU: 88955517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Caliper Part Number: 88955505
$174.52 MSRP: $325.68
You Save: $151.16 (47%)
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Wheel Brake Cylinder/Caliper Piston; Brake Caliper
- Position: Rear Passenger Side
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.2 x 7.1 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88955505
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Overhaul Kit, Rear Driver Side Part Number: 19208041
$178.86 MSRP: $347.15
You Save: $168.29 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Driver Side
- Replaces: 88955504
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.9 x 7.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Caliper, Front Driver Side Part Number: 19208035
$66.03 MSRP: $124.00
You Save: $57.97 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 88955516
- Item Weight: 6.50 Pounds
- Item Dimensions: 9.2 x 8.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208035
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Base, Platinum | 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac XLR Caliper, Front Passenger Side Part Number: 19208038
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front Passenger Side
- Replaces: 88967279
- Item Weight: 5.60 Pounds
- Item Dimensions: 9.3 x 8.2 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac XLR Caliper, Front Driver Side Part Number: 19208037
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Front Driver Side
- Replaces: 88967278
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.3 x 4.0 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac XLR Caliper, Rear Passenger Side Part Number: 19208044
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper Piston
- Position: Rear Passenger Side
- Replaces: 88967281
- Item Weight: 3.10 Pounds
- Item Dimensions: 8.1 x 7.3 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208044
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac XLR Caliper, Rear Driver Side Part Number: 19208043
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Rear Driver Side
- Replaces: 88967280
- Item Weight: 3.20 Pounds
- Item Dimensions: 8.1 x 7.4 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208043
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- V | 8 Cyl 4.4 L GAS
View related parts
2009 Cadillac XLR Caliper, Front Part Number: 19208036
Product Specifications
- Other Name: Caliper Kit, Front Brake; Brake Caliper; Caliper Kit, Wheel Brake Cylinder/Caliper
- Position: Front
- Item Weight: 5.90 Pounds
- Item Dimensions: 9.1 x 7.8 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19208036
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac XLR Submodels:
- Platinum | 8 Cyl 4.6 L GAS

2009 Cadillac XLR Brake Calipers

With a comprehensive array of OEM 2009 Cadillac XLR Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac XLR Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac XLR Brake Calipers Parts and Q&A

Q: How to replace the front brake calipers on 2009 Cadillac XLR?
A: The brake master cylinder reservoir fluid check should serve as the starting point for front brake caliper replacement. The fluid replacement amount will depend on the reservoir level position with respect to its full and minimum ranges. Before replacement start by lifting the vehicle and removing its tire and wheel assembly. The next step is to disconnect both the brake caliper inlet fitting bolt and brake hose from the caliper while throwing out the two copper brake hose gaskets that might be stuck on the caliper or hose end. Position plugs within the brake caliper and hose openings to maintain fluid integrity before removing the caliper guide pin bolts to detach the caliper from its mounting bracket. Check the caliper slide boots for all indications of damage. If necessary, replace them. Mount the brake caliper onto its bracket and apply 31 nm (23 lb ft) torque when tightening guide pin bolts. The brake caliper requires new copper gaskets to be installed on its opening and hose before fitting the hose to the inlet with a 45 nm (33 lb ft) torque specification. Bleed the hydraulic brake system first before reinstalling the tire-wheel assembly and confirming the vehicle is suitably lowered.