How to replace the rear brake line on 2005 Cadillac XLR?

First lift the vehicle and use supporting equipment before removing the rear wheel and tire. Remove dust and damage from the brake system parts before putting a rubber seal or plug on the open pipe to keep brake fluid inside the system. Put a back up wrench on the hose end to separate the brake pipe from the brake hose. Then seal the open pipe at its end but leave the brake pipe undamaged by the plug. Pull out the brake hose from its bracket after taking off the retainer from the hose bracket. Take off the brake caliper inlet bolt then disconnect the brake hose from the caliper and discard attached copper brake hose gaskets. Each installation process requires you to apply new copper brake hose gaskets at the ends of the hose and brake caliper before putting the bolt through the caliper inlet fitting and the brake hose. Then fix these components to the brake caliper by tightening the bolt to 45 nm (33 ft. Lbs.). Secure the brake hose to its bracket connection without bending or twisting the hose. Install the retainer piece onto the brake hose fitting present on the bracket. After removing the rubber cover at the brake pipe end, attach the brake pipe fitting to the brake hose unit a back up wrench then tighten it to 18 nm (13 ft. Lbs.). Reassemble the tire and wheel before repairing the brake system with a proper handling process.

OEM 2005 Cadillac XLR Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Brake Lines found

View related parts
2005 Cadillac XLR Flex Hose, Rear Passenger Side
Part Number: 19366780
$32.06 MSRP: $58.02
You Save: $25.96 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10307426, 15802376, 20989694
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.1 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac XLR Flex Hose, Front Passenger Side
Part Number: 19370735
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15802378, 19331543
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 2.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac XLR Flex Hose, Rear Driver Side
Part Number: 19366781
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 10307425, 15802375, 20989693
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 2.1 x 17.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366781
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Cadillac XLR Flex Hose, Front Driver Side
Part Number: 19366675
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15802377, 19331542
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 2.0 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366675
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Cadillac XLR Submodels:
- Base, Platinum, V | 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2005 Cadillac XLR Brake Line

With a comprehensive array of OEM 2005 Cadillac XLR Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Cadillac XLR Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Cadillac XLR Parts Questions & Experts Answers

Q: How to replace the rear brake line on 2005 Cadillac XLR?
A: First lift the vehicle and use supporting equipment before removing the rear wheel and tire. Remove dust and damage from the brake system parts before putting a rubber seal or plug on the open pipe to keep brake fluid inside the system. Put a back up wrench on the hose end to separate the brake pipe from the brake hose. Then seal the open pipe at its end but leave the brake pipe undamaged by the plug. Pull out the brake hose from its bracket after taking off the retainer from the hose bracket. Take off the brake caliper inlet bolt then disconnect the brake hose from the caliper and discard attached copper brake hose gaskets. Each installation process requires you to apply new copper brake hose gaskets at the ends of the hose and brake caliper before putting the bolt through the caliper inlet fitting and the brake hose. Then fix these components to the brake caliper by tightening the bolt to 45 nm (33 ft. Lbs.). Secure the brake hose to its bracket connection without bending or twisting the hose. Install the retainer piece onto the brake hose fitting present on the bracket. After removing the rubber cover at the brake pipe end, attach the brake pipe fitting to the brake hose unit a back up wrench then tighten it to 18 nm (13 ft. Lbs.). Reassemble the tire and wheel before repairing the brake system with a proper handling process.