How to properly replace brake lines and ensure system integrity on 2010 Chevrolet Corvette?

To avoid brake system failure and maintain brake functionality use double-walled steel brake pipes and attach the new system according to original bolt placements. The replacement brake pipe must match the existing design and use components such as tube nuts and fittings that match specific sizes. First examine the replacement area of the brake pipe then free it from its retainers. After measuring total pipe length account for one 6.35 mm (.250 in) flare for each bend or fitting. Use the J 45405 pipe cutter to cut the brake line directly to its measured length. Take out the damaged section and get the required brake pipe elements including tube nuts. Use the right stripping blade from the J 45405 tool package to remove nylon coating until you reach the metal part of the brake pipe. Use the de-burring tool to chamfer both sides of the pipe then fasten the tube nuts onto it. Clean the brake pipe and tool of dust before loosening the clamping screw. Put die halves into the die cage and pass the ready pipe through the back opening. Verify the die position and tighten the clamping screw afterward. Adjust the hydraulic mandrel selection and close the valve before operating the J 45405 lever until the mandrel meets the tightening dies. After retraction open the valve to remove the dies and test the flare. The correct dimensions are 7.10 mm (0.279 in) exclusive of plus or minus 0.18 mm (0.007 in) for 4.76 mm (3/16 in) diameter tubing. You can modify the new pipe with a brake pipe bending tool while keeping a 19 mm (3/4 inch) safe distance from all moving parts. Connect the pipe with suitable joints then fixes it to retaining blocks while working through the hydraulic brake fluid process ending with an engine start and brake test.

OEM 2010 Chevrolet Corvette Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Lines found

View related parts
2010 Chevrolet Corvette Flex Hose, Rear Passenger Side Part Number: 19366780
$31.09 MSRP: $58.02
You Save: $26.93 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10307426, 15802376, 20989694
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.2 x 2.1 x 17.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366780
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Front Passenger Side Part Number: 19370735
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Passenger Side
- Replaces: 15802378, 19331543
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.2 x 2.1 x 14.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370735
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Rear Driver Side Part Number: 19366781
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 10307425, 15802375, 20989693
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.0 x 2.1 x 17.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366781
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Front Driver Side Part Number: 19366675
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 15802377, 19331542
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.2 x 2.0 x 14.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366675
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Front Driver Side Part Number: 19370737
Product Specifications
- Other Name: Hose Assembly, Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front Driver Side
- Replaces: 19331541, 10345990
- Item Weight: 0.80 Pounds
- Item Dimensions: 25.0 x 7.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370737
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Rear Passenger Side Part Number: 19370736
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 10345989, 19331540
- Item Weight: 0.80 Pounds
- Item Dimensions: 17.2 x 4.8 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19370736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Rear Passenger Side Part Number: 19366782
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Passenger Side
- Replaces: 15222937, 20989695
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.1 x 17.0 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366782
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Flex Hose, Rear Driver Side Part Number: 19366783
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 15222938, 20989696
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 2.1 x 17.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427 Limited Edition Z06, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
2010 Chevrolet Corvette Brake Hose, Rear Driver Side Part Number: 19366776
Product Specifications
- Other Name: Hose Assembly, Rear Brake; Hydraulic Hose; Brake Line; Hose, Hydraulic Brake
- Position: Rear Driver Side
- Replaces: 25998825
- Item Weight: 16.30 Pounds
- Item Dimensions: 0.3 x 1.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19366776
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Corvette Submodels:
- 427, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Brake Line

With a comprehensive array of OEM 2010 Chevrolet Corvette Brake Line, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Brake Line are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Brake Line Parts and Q&A

Q: How to properly replace brake lines and ensure system integrity on 2010 Chevrolet Corvette?
A: To avoid brake system failure and maintain brake functionality use double-walled steel brake pipes and attach the new system according to original bolt placements. The replacement brake pipe must match the existing design and use components such as tube nuts and fittings that match specific sizes. First examine the replacement area of the brake pipe then free it from its retainers. After measuring total pipe length account for one 6.35 mm (.250 in) flare for each bend or fitting. Use the J 45405 pipe cutter to cut the brake line directly to its measured length. Take out the damaged section and get the required brake pipe elements including tube nuts. Use the right stripping blade from the J 45405 tool package to remove nylon coating until you reach the metal part of the brake pipe. Use the de-burring tool to chamfer both sides of the pipe then fasten the tube nuts onto it. Clean the brake pipe and tool of dust before loosening the clamping screw. Put die halves into the die cage and pass the ready pipe through the back opening. Verify the die position and tighten the clamping screw afterward. Adjust the hydraulic mandrel selection and close the valve before operating the J 45405 lever until the mandrel meets the tightening dies. After retraction open the valve to remove the dies and test the flare. The correct dimensions are 7.10 mm (0.279 in) exclusive of plus or minus 0.18 mm (0.007 in) for 4.76 mm (3/16 in) diameter tubing. You can modify the new pipe with a brake pipe bending tool while keeping a 19 mm (3/4 inch) safe distance from all moving parts. Connect the pipe with suitable joints then fixes it to retaining blocks while working through the hydraulic brake fluid process ending with an engine start and brake test.