How to replace the Alternator Bracket and Engine Lift Bracket (LNJ) on 2008 Chevrolet Equinox?

You should start by taking out the generator and then remove the drive belt tensioner before replacing the generator bracket and engine lift bracket (LNJ). After that, take out the generator bracket bolts before pulling the generator bracket off. The first step for installation is to put on the generator bracket, checking the fastener notice for instructions. After that, put in the generator bracket bolts and tighten them in the proper order to 50 n.m (37 lb ft). When you are done, install the drive belt tensioner and put the generator back.

OEM 2008 Chevrolet Equinox Alternator Bracket

Alternator Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Alternator Bracket found

View related parts
2008 Chevrolet Equinox Mount Bracket
Part Number: 12587423
Product Specifications
- Other Name: Bracket, Generator Mounting; Alternator Bracket
- Item Weight: 1.80 Pounds
- Item Dimensions: 11.0 x 8.6 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12587423
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2008 Chevrolet Equinox Alternator Bracket

With a comprehensive array of OEM 2008 Chevrolet Equinox Alternator Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Alternator Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Parts Questions & Experts Answers

Q: How to replace the Alternator Bracket and Engine Lift Bracket (LNJ) on 2008 Chevrolet Equinox?
A: You should start by taking out the generator and then remove the drive belt tensioner before replacing the generator bracket and engine lift bracket (LNJ). After that, take out the generator bracket bolts before pulling the generator bracket off. The first step for installation is to put on the generator bracket, checking the fastener notice for instructions. After that, put in the generator bracket bolts and tighten them in the proper order to 50 n.m (37 lb ft). When you are done, install the drive belt tensioner and put the generator back.

Related 2008 Chevrolet Equinox Parts

Alternate Year Models

2007 Chevrolet Equinox Alternator Bracket 2009 Chevrolet Equinox Alternator Bracket