How to service and repair the Engine Mount, Motor and Transmission Mount on 2008 Chevrolet Equinox?

Start your engine and transmission mount servicing and repair work by lifting and placing a vehicle support underneath. Set two floor jacks on wood blocks that should rest beneath both the powertrain engine and transmission to provide support. Begin at the engine compartment to loosen bolts uniting the transmission mount to the transmission before proceeding with the engine mount to intermediate bracket bolts. The service begins with through-bolt loosening for the front and rear transmission mount without removing them before proceeding to loosen the rear mount cradle bolts. Adjust the placement of floor jacks until the mount and its bracket maintain a 1/8 inch alignment while both align with the front clevis of the cradle. Tighten the transmission mount to transmission bolts starting with the rear bolt then the middle bolt and finally the front bolt until they reach the specification of 50 N.m (37 lb ft). The engine mount to intermediate bracket bolts should be tightened with a starting sequence on the center bolt and final torque setting at 50 N.m (37 lb ft). Reposition the rear transmission mount bracket to rest on transmission housing and then position the rear transmission mount at the center of the back cradle clevis before tightening the rear transmission mount to cradle bolts to 50 N.m (37 lb ft). You should shake the powertrain front to rear after taking out the floor jacks before permitting it to stabilize. The next step requires fastening the rear transmission mount through bolt to 110 N.m (81 lb ft) and following with the front transmission mount through bolt to achieve the same torque value. Finally, lower the vehicle.

OEM 2008 Chevrolet Equinox Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2008 Chevrolet Equinox Mount Insulator
Part Number: 15292987
$17.20 MSRP: $27.92
You Save: $10.72 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount
- Item Weight: 1.70 Pounds
- Item Dimensions: 12.9 x 6.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15292987
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Rear Mount Bracket
Part Number: 15822575
$87.55 MSRP: $289.81
You Save: $202.26 (70%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.7 x 8.6 x 6.8 inches
- Condition: New
- SKU: 15822575
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Mount Bracket
Part Number: 22692548
$114.83 MSRP: $201.44
You Save: $86.61 (43%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Bracket; Motor Mount
- Item Weight: 1.80 Pounds
- Item Dimensions: 14.9 x 5.6 x 5.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22692548
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
2008 Chevrolet Equinox Front Mount Bracket
Part Number: 15292985
$34.88 MSRP: $54.64
You Save: $19.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket, Engine Mounting
- Item Weight: 2.30 Pounds
- Item Dimensions: 12.4 x 12.5 x 10.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15292985
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Front Mount
Part Number: 25979417
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Motor Mount; Mount; Mount, Engine Mount Dampening
- Item Weight: 4.40 Pounds
- Item Dimensions: 11.7 x 8.5 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25979417
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Rear Mount Bracket
Part Number: 15822576
Product Specifications
- Other Name: Bracket, Engine Mounting; Engine Mount Torque Strut; Engine Mount Bracket; Engine Torque Mount; Motor Mount
- Position: Rear
- Item Weight: 4.30 Pounds
- Item Dimensions: 10.9 x 8.7 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15822576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- Sport | 6 Cyl 3.6 L GAS
View related parts
2008 Chevrolet Equinox Front Mount
Part Number: 25979189
Product Specifications
- Other Name: Mount Assembly-Engine; Engine Mount Bracket; Engine Mount; Motor Mount; Mount; Mount, Engine Mount Dampening
- Replaces: 15297043, 22698065, 22698349, 25826943
- Item Weight: 4.40 Pounds
- Item Dimensions: 11.4 x 6.5 x 6.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25979189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Equinox Submodels:
- LS, LT, LTZ | 6 Cyl 3.4 L GAS

2008 Chevrolet Equinox Engine Mount

With a comprehensive array of OEM 2008 Chevrolet Equinox Engine Mount, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Equinox Engine Mount are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Equinox Engine Mount Parts Questions & Experts Answers

Q: How to service and repair the Engine Mount, Motor and Transmission Mount on 2008 Chevrolet Equinox?
A: Start your engine and transmission mount servicing and repair work by lifting and placing a vehicle support underneath. Set two floor jacks on wood blocks that should rest beneath both the powertrain engine and transmission to provide support. Begin at the engine compartment to loosen bolts uniting the transmission mount to the transmission before proceeding with the engine mount to intermediate bracket bolts. The service begins with through-bolt loosening for the front and rear transmission mount without removing them before proceeding to loosen the rear mount cradle bolts. Adjust the placement of floor jacks until the mount and its bracket maintain a 1/8 inch alignment while both align with the front clevis of the cradle. Tighten the transmission mount to transmission bolts starting with the rear bolt then the middle bolt and finally the front bolt until they reach the specification of 50 N.m (37 lb ft). The engine mount to intermediate bracket bolts should be tightened with a starting sequence on the center bolt and final torque setting at 50 N.m (37 lb ft). Reposition the rear transmission mount bracket to rest on transmission housing and then position the rear transmission mount at the center of the back cradle clevis before tightening the rear transmission mount to cradle bolts to 50 N.m (37 lb ft). You should shake the powertrain front to rear after taking out the floor jacks before permitting it to stabilize. The next step requires fastening the rear transmission mount through bolt to 110 N.m (81 lb ft) and following with the front transmission mount through bolt to achieve the same torque value. Finally, lower the vehicle.