How to calibrate the Brake Light Switch on 2008 Chevrolet HHR?

Before calibrating the brake pedal position sensor you must install a scan tool. Start your ignition without engine power then open the diagnostics screen. First choose the vehicle then navigate to body and lastly select radio for access to Body Control Module. Select module setup on screen and choose bpps calibration to complete the on-screen process. To get the bpps working right you need to perform this calibration following bpps or bcm service since it establishes the home value for the bpps which bcm uses to understand brake applications and share them through class 2 bus with vehicle components.

OEM 2008 Chevrolet HHR Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Chevrolet HHR Clutch Switch
Part Number: 13597428
$9.04 MSRP: $16.98
You Save: $7.94 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Brake Pedal Position; Clutch Pedal Position Switch; Brake Light Switch; Stoplamp Switch; Sensor, Stop Lamp Switch; Sensor, Engine Clutch; Sensor, Brake
- Replaced by: 13549051
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.7 x 3.3 x 1.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 13597428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS

2008 Chevrolet HHR Brake Light Switch

With a comprehensive array of OEM 2008 Chevrolet HHR Brake Light Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Brake Light Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Brake Light Switch Parts Questions & Experts Answers

Q: How to calibrate the Brake Light Switch on 2008 Chevrolet HHR?
A: Before calibrating the brake pedal position sensor you must install a scan tool. Start your ignition without engine power then open the diagnostics screen. First choose the vehicle then navigate to body and lastly select radio for access to Body Control Module. Select module setup on screen and choose bpps calibration to complete the on-screen process. To get the bpps working right you need to perform this calibration following bpps or bcm service since it establishes the home value for the bpps which bcm uses to understand brake applications and share them through class 2 bus with vehicle components.