How to replace the hydraulic hose on 2008 Chevrolet HHR?

The process of replacing the hydraulic Clutch Hose begins by removing the ubec. A shop towel placed under the Clutch Master Cylinder combined with the brake master cylinder reservoir will collect fluid leakage. Release the Clutch Hose from both connectors between the Clutch Master Cylinder and brake master cylinder reservoir before disconnecting the clutch line at its junction with the clutch actuator cylinder and the transaxle. Drain the fluid through compatible receptacles. First attach the clutch line connecting points to the Clutch Master Cylinder and transaxle followed by attaching the Clutch Hose connecting points to the clutch actuator cylinder and brake master cylinder reservoir. Throw away the shop towel after removal. After ubec installation refill the brake/clutch reservoir with dot 3 hydraulic fluid to the correct level followed by clutch hydraulic system bleeding.

OEM 2008 Chevrolet HHR Hydraulic Hose

Brake Hydraulic Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hydraulic Hoses found

View related parts
2008 Chevrolet HHR Flex Hose
Part Number: 19366736
$12.99 MSRP: $31.20
You Save: $18.21 (59%)
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brake Front; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front and Rear
- Replaces: 22706789
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.4 x 3.4 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 19366736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet HHR Flex Hose
Part Number: 24231368
Product Specifications
- Other Name: Hose, Hydraulic Clutch Reservoir; Hydraulic Hose; Clutch Hose
- Item Weight: 0.70 Pounds
- Item Dimensions: 5.1 x 5.3 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24231368
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- LS, LS Panel, LT, LT Panel, SS, SS Panel | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
2008 Chevrolet HHR Flex Hose, Front
Part Number: 15939642
Product Specifications
- Other Name: Hose Assembly-Front Brake; Hydraulic Hose; Brake Hose; Brake Line; Hose, Hydraulic Brake
- Position: Front
- Item Weight: 0.80 Pounds
- Item Dimensions: 17.7 x 1.9 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 15939642
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet HHR Submodels:
- SS, SS Panel | 4 Cyl 2.0 L GAS

2008 Chevrolet HHR Hydraulic Hose

With a comprehensive array of OEM 2008 Chevrolet HHR Hydraulic Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet HHR Hydraulic Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet HHR Parts Questions & Experts Answers

Q: How to replace the hydraulic hose on 2008 Chevrolet HHR?
A: The process of replacing the hydraulic Clutch Hose begins by removing the ubec. A shop towel placed under the Clutch Master Cylinder combined with the brake master cylinder reservoir will collect fluid leakage. Release the Clutch Hose from both connectors between the Clutch Master Cylinder and brake master cylinder reservoir before disconnecting the clutch line at its junction with the clutch actuator cylinder and the transaxle. Drain the fluid through compatible receptacles. First attach the clutch line connecting points to the Clutch Master Cylinder and transaxle followed by attaching the Clutch Hose connecting points to the clutch actuator cylinder and brake master cylinder reservoir. Throw away the shop towel after removal. After ubec installation refill the brake/clutch reservoir with dot 3 hydraulic fluid to the correct level followed by clutch hydraulic system bleeding.