OEM 2008 Chevrolet Malibu Neutral Safety Switch

2008 Chevrolet Malibu Neutral Safety Switch Parts Questions & Experts Answers

• Q: How to service and repair the Neutral Safety Switch for the 6T40/6T45 automatic transmission on 2008 Chevrolet Malibu?

  A: Service and repair processes for the 6t40/6t45 automatic transmission transmission position switch/sensor begin with control Valve Body removal. Use j 23129 (Universal Seal Remover) and j 6125-b (Slide Hammer) to extract the manual shaft detent lever hub pin when the manual shift shaft pin has been removed. Discard the extracted pin. The manual shaft must be removed along with the manual shaft detent (w/shift position switch) lever assembly. You should apply automatic transmission fluid lubrication to the manual shaft initially to safeguard the manual shift shaft seal before installing the manual shaft detent (w/shift position switch) lever assembly then the manual shaft and finally the manual shaft detent lever hub pin at the proper 7.9 mm (0.38 in) height. The manual shaft pin installation should use j 41229 (Manual Shaft Pin Installer) which allows measurements between 7.2-8.2 mm (0.28-0.32 in) to prevent damage. After reinstalling the control Valve Body complete the service fast learn adapt process.