How to replace the steering knuckle in the rear suspension on 2008 Chevrolet Malibu?

The repair of the rear suspension's Steering Knuckle requires a vehicle lift and support followed by tire wheel assembly removal. Start by detaching the park brake cable from the Trailing Arm and thereafter take out the rear wheel bearing/hub assembly. Begin by eliminating the lower shock absorber bolt from the knuckle before moving to the toe link to knuckle bolt and finally removing the rear coil spring. Ustomer service note: safety glasses should be worn at all times when handling tools. Set the knuckle on the upper control arm and tighten both bolt and nut for the installation step followed by coil spring fitting. Begin by installing the stabilizer shaft to knuckle bolt and then move to installing the toe link to knuckle bolt and final nut installation. Fasten the Trailing Arm to knuckle bolts until torque reaches 180 n.m (133 lb ft). The process of installation starts with the lower shock to knuckle bolt and progresses to the wheel bearing/hub assembly. Begin by lowering the vehicle; install the rear tire and wheel assembly; reattach the park brake cable on the Trailing Arm; finally perform a vehicle wheel alignment.

OEM 2008 Chevrolet Malibu Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2008 Chevrolet Malibu Knuckle, Green Line, Driver Side
Part Number: 19303853
$287.92 MSRP: $457.11
You Save: $169.19 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 21995733, 22705299, 25872803
- Item Weight: 6.50 Pounds
- Item Dimensions: 14.4 x 14.6 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Malibu Knuckle, Green Line, Passenger Side
Part Number: 19303854
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15225210, 25872804, 22705300, 21995734
- Item Weight: 6.40 Pounds
- Item Dimensions: 11.8 x 11.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303854
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Malibu Knuckle, Green Line, Rear Driver Side
Part Number: 19303839
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaces: 15942149, 22669733
- Item Weight: 6.80 Pounds
- Item Dimensions: 15.9 x 11.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2008 Chevrolet Malibu Knuckle, Green Line, Rear Passenger Side
Part Number: 19303840
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 15942150, 22669734
- Item Weight: 6.40 Pounds
- Item Dimensions: 6.6 x 15.4 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2008 Chevrolet Malibu Steering Knuckle

With a comprehensive array of OEM 2008 Chevrolet Malibu Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Malibu Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the steering knuckle in the rear suspension on 2008 Chevrolet Malibu?
A: The repair of the rear suspension's Steering Knuckle requires a vehicle lift and support followed by tire wheel assembly removal. Start by detaching the park brake cable from the Trailing Arm and thereafter take out the rear wheel bearing/hub assembly. Begin by eliminating the lower shock absorber bolt from the knuckle before moving to the toe link to knuckle bolt and finally removing the rear coil spring. Ustomer service note: safety glasses should be worn at all times when handling tools. Set the knuckle on the upper control arm and tighten both bolt and nut for the installation step followed by coil spring fitting. Begin by installing the stabilizer shaft to knuckle bolt and then move to installing the toe link to knuckle bolt and final nut installation. Fasten the Trailing Arm to knuckle bolts until torque reaches 180 n.m (133 lb ft). The process of installation starts with the lower shock to knuckle bolt and progresses to the wheel bearing/hub assembly. Begin by lowering the vehicle; install the rear tire and wheel assembly; reattach the park brake cable on the Trailing Arm; finally perform a vehicle wheel alignment.