How to replace the steering knuckle in the rear suspension on 2007 Chevrolet Malibu?

In order to replace the Steering Knuckle on the rear suspension, lift and support the vehicle, remove the tire and wheel. Then remove the rear Wheel Bearing and operate a proper jack to raise the knuckle tension from the shock. Take off the lower shock to knuckle bolt, the coil spring, the toe link, the upper control arm to knuckle bolt and nut, the trailing arm to knuckle bolts, as well as stabilizer shaft link to knuckle bolt before removing the knuckle from the vehicle at the end. To install, start with the installation of the trailing arm to the knuckle bolts (torque them to 180 N.m) 133lb. Ft). Then, mount the upper control arm to control arm and control arm bolt as well as nut, fastening them to 110 n.m (81lb ft) plus 70 degrees. Proceed to install the toe link, the coil spring, and the lower shock absorber to knuckle bolt, to tighten it; 180 n.m (133 lb ft). Next, attach the stabilizer link to the knuckle; tighten bolt to 55 n.m (41 lb ft). Lastly, replace the rear Wheel Bearing and brake components, the tire and wheel, and drop the vehicle.

OEM 2007 Chevrolet Malibu Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2007 Chevrolet Malibu Knuckle, Green Line, Driver Side
Part Number: 19303853
$287.92 MSRP: $457.11
You Save: $169.19 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 21995733, 22705299, 25872803
- Item Weight: 6.50 Pounds
- Item Dimensions: 14.4 x 14.6 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303853
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Knuckle, Green Line, Passenger Side
Part Number: 19303854
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15225210, 25872804, 22705300, 21995734
- Item Weight: 6.40 Pounds
- Item Dimensions: 11.8 x 11.6 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303854
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Knuckle, Green Line, Rear Driver Side
Part Number: 19303839
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Driver Side
- Replaces: 15942149, 22669733
- Item Weight: 6.80 Pounds
- Item Dimensions: 15.9 x 11.9 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303839
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
2007 Chevrolet Malibu Knuckle, Green Line, Rear Passenger Side
Part Number: 19303840
Product Specifications
- Other Name: Knuckle, Rear Suspension; Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Replaces: 15942150, 22669734
- Item Weight: 6.40 Pounds
- Item Dimensions: 6.6 x 15.4 x 11.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19303840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2007 Chevrolet Malibu Steering Knuckle

With a comprehensive array of OEM 2007 Chevrolet Malibu Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Chevrolet Malibu Parts Questions & Experts Answers

Q: How to replace the steering knuckle in the rear suspension on 2007 Chevrolet Malibu?
A: In order to replace the Steering Knuckle on the rear suspension, lift and support the vehicle, remove the tire and wheel. Then remove the rear Wheel Bearing and operate a proper jack to raise the knuckle tension from the shock. Take off the lower shock to knuckle bolt, the coil spring, the toe link, the upper control arm to knuckle bolt and nut, the trailing arm to knuckle bolts, as well as stabilizer shaft link to knuckle bolt before removing the knuckle from the vehicle at the end. To install, start with the installation of the trailing arm to the knuckle bolts (torque them to 180 N.m) 133lb. Ft). Then, mount the upper control arm to control arm and control arm bolt as well as nut, fastening them to 110 n.m (81lb ft) plus 70 degrees. Proceed to install the toe link, the coil spring, and the lower shock absorber to knuckle bolt, to tighten it; 180 n.m (133 lb ft). Next, attach the stabilizer link to the knuckle; tighten bolt to 55 n.m (41 lb ft). Lastly, replace the rear Wheel Bearing and brake components, the tire and wheel, and drop the vehicle.