Other Name: Shock; Absorber, Front And Rear Suspension
Position: Rear
Replaces: 10363556, 22719455
Item Weight: 4.30 Pounds
Item Dimensions: 8.1 x 5.1 x 24.4 inches
Condition: New
Fitment Type: Direct Replacement
Require Quantity: 2
SKU: 25831691
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2007 Chevrolet Malibu Submodels:
Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
2007 Chevrolet Malibu Shock Absorber
With a comprehensive array of OEM 2007 Chevrolet Malibu Shock Absorber, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Chevrolet Malibu Shock Absorber are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2007 Chevrolet Malibu Shock Absorber Parts Questions & Experts Answers
Q: How to replace the shock absorber on an Extended Sedan on 2007 Chevrolet Malibu?
A: The Shock Absorber replacement process begins by first lifting and supporting the extended sedan vehicle with a suitable tool. Then drivers need to remove both tire and wheel. A suitable jack stand enables the raising of the rear knuckle to reduce spring tension before removing lower shock bolts and upper shock to body nuts which allows the shock to be removed from the vehicle. Place the shock inside the vehicle before you install the Shock Absorber to body nuts and tighten them to 25 n.m (18 lb ft.). Proceed by installing the Shock Absorber onto the knuckle bolt before tightening it to 180 n.m (133 lb ft). Once the jack stand leaves the rear knuckle proceed with installation by putting back tire and wheel before lowering the vehicle.