Other Name: Relay Assembly, Stop Lamp Switch *Light Gray; Multi Purpose Relay; ABS Relay; Relay; Relay, Air Suspension And Inflator Unit; Relay, Voltage And Glow Plug
Replaces: 12135010, 12193605
Item Weight: 0.50 Pounds
Item Dimensions: 2.5 x 2.4 x 1.5 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 19259019
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
Other Name: Relay, Main Wiring Junction And Fuse Block; Multi Purpose Relay; Fog Light Relay; Relays: Horn, Compressor, Head/Wash, Head/Fog, Turn Signal, Voltage & Glow Plug, A/C, Fuel Pump, Tail Lamp
Replaces: 19115021, 19115563
Item Weight: 0.40 Pounds
Item Dimensions: 1.6 x 1.2 x 0.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 21997416
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2008 Chevrolet Uplander Submodels:
Base, LS, LT | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
2008 Chevrolet Uplander Relay
With a comprehensive array of OEM 2008 Chevrolet Uplander Relay, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 Chevrolet Uplander Relay are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2008 Chevrolet Uplander Relay Parts Questions & Experts Answers
Q: How to replace the Power Distribution Relay attached to the wire harness on 2008 Chevrolet Uplander?
A: To replace the Power Distribution Relay connected to the wire harness, find the relay using the Master Electrical Component List on its location in the vehicle. Then, remove any fasteners attached to the relay, followed by any connector position assurance (CPA) devices or secondary locks being sure not to damage anything while detaching the relay from the wiring harness. Upon separating the relay from the wire harness connector, connect the new relay to the wire harness connector, reattach any CPA devices or secondary locks and finally secure the relay with the original fasteners or tape.