How to replace the blower motor resistor on 2008 GMC Canyon?

First disconnect the blower motor resistor electrical connector before removing its mounting screws and taking out the unit. Put the replacement blower motor resistor in its designated position before fastening it with mounting screws that you should tighten to 1.9 N.m (17 lb in following the Fastener Notice. Reinstall the cable connection to the blower motor resistor.

OEM 2008 GMC Canyon Blower Motor Resistor

Heater Blower Motor Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blower Motor Resistor found

View related parts
2008 GMC Canyon Resistor Part Number: 15218254
$16.71 MSRP: $31.38
You Save: $14.67 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: HVAC Blower Motor Regulator; Blower Motor Resistor; Resistor, A/C Evaporator Blower; Resistor, Heater Blower Motor
- Replaces: 89018331
- Item Weight: 0.60 Pounds
- Item Dimensions: 6.9 x 6.6 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15218254
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2008 GMC Canyon Submodels:
- SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2008 GMC Canyon Blower Motor Resistor

With a comprehensive array of OEM 2008 GMC Canyon Blower Motor Resistor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2008 GMC Canyon Blower Motor Resistor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2008 GMC Canyon Blower Motor Resistor Parts and Q&A

Q: How to replace the blower motor resistor on 2008 GMC Canyon?
A: First disconnect the blower motor resistor electrical connector before removing its mounting screws and taking out the unit. Put the replacement blower motor resistor in its designated position before fastening it with mounting screws that you should tighten to 1.9 N.m (17 lb in following the Fastener Notice. Reinstall the cable connection to the blower motor resistor.