ChevyParts
My Garage
My Account
Cart
OEM 2009 Cadillac CTS Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Power Steering Pumps found
2009 Cadillac CTS Power Steering Pump
Part Number: 15224339$249.11 MSRP: $460.90You Save: $211.79 (46%)Product Specifications- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Item Weight: 3.30 Pounds
- Item Dimensions: 9.5 x 6.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15224339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 25936422
- Item Weight: 4.40 Pounds
- Item Dimensions: 6.9 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20806165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.9 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25914590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Cadillac CTS Power Steering Pump
With a comprehensive array of OEM 2009 Cadillac CTS Power Steering Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac CTS Power Steering Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Cadillac CTS Parts Questions & Experts Answers
- Q: How to replace the power steering pump on a V6 engine on 2009 Cadillac CTS?A: One needs to start the v6 Power Steering Pump replacement by taking off the front air deflector followed by placing drain pans under the vehicle according to need. Remove all possible power steering fluid from the remote power steering fluid reservoir before separating the Power Steering Pump pulley. The power steering fluid reservoir outlet hose and power steering gear inlet hose fitting needs to be removed from the pump. Begin by unbolt the Power Steering Pump bracket then extract both the power steering components and bracket from the car. The installer must carry out the transfer operation for the Power Steering Pump bracket if needed. Position the Power Steering Pump and bracket during installation by using hand tightening on all fasteners first and next torque Power Steering Pump bolts to 50 nm (37 lb ft) according to the identified sequence. Mandate the Power Steering Pump to receive the inlet hose fitting by tightening it to 38 nm (28 lb ft) and add the fluid reservoir outlet hose afterward. Wipe away all extra fluid from the automobile while also taking away drain pans and then put on the Power Steering Pump pulley. Scott should begin by installing the front air deflector then proceed to fill and bleed the power steering system.
Related 2009 Cadillac CTS Parts
2009 Cadillac CTS Steering Wheel
2009 Cadillac CTS Steering Column
2009 Cadillac CTS Power Steering Hose
2009 Cadillac CTS Power Steering Reservoir
2009 Cadillac CTS Rack And Pinion
2009 Cadillac CTS Rack and Pinion Boot
2009 Cadillac CTS Steering Angle Sensor
2009 Cadillac CTS Steering Column Cover
2009 Cadillac CTS Steering Shaft
2009 Cadillac CTS Tie Rod
2009 Cadillac CTS Tie Rod End