ChevyParts
My Garage
My Account
Cart
OEM 2010 Cadillac CTS Power Steering Pump
Power Steering Pump Unit- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Power Steering Pumps found
2010 Cadillac CTS Power Steering Pump
Part Number: 15224339$249.11 MSRP: $460.90You Save: $211.79 (46%)Product Specifications- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Item Weight: 3.30 Pounds
- Item Dimensions: 9.5 x 6.2 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15224339
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Replaces: 25936422
- Item Weight: 4.40 Pounds
- Item Dimensions: 6.9 x 6.6 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20806165
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Item Weight: 3.20 Pounds
- Item Dimensions: 7.9 x 5.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25914590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2010 Cadillac CTS Power Steering Pump
With a comprehensive array of OEM 2010 Cadillac CTS Power Steering Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac CTS Power Steering Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2010 Cadillac CTS Parts Questions & Experts Answers
- Q: How to replace the power steering pump on a V6 engine on 2010 Cadillac CTS?A: The procedure to replace a v6 Power Steering Pump begins with blocking the front air deflector and then the front compartment lower noise shield before using drain pans to empty power steering fluid from the reservoir. Start by removing the Power Steering Pump pulley followed by disconnecting both outlet hose of power steering fluid reservoir and inlet hose of the pump. Finally remove Power Steering Pump bracket bolts. Tear the Power Steering Pump and bracket along with its bracket out of the vehicle before any possible bracket relocation. Install the Power Steering Pump system by placing first the pump and bracket into position then manually tighten all fasteners before executing torque measurements. Lock the Power Steering Pump bracket bolts at 50 nm (37 lb ft) torque. After that, place the power steering gear inlet hose fitting and power steering fluid reservoir outlet hose on the pump. Eliminate remaining fluid through cleaning then remove drain pans before installing the Power Steering Pump pulley. During the last stage the technician must install the front compartment lower noise shield and the front air deflector before filling and bleeding the power steering system.
Related 2010 Cadillac CTS Parts
2010 Cadillac CTS Steering Wheel
2010 Cadillac CTS Steering Column
2010 Cadillac CTS Power Steering Hose
2010 Cadillac CTS Power Steering Reservoir
2010 Cadillac CTS Rack And Pinion
2010 Cadillac CTS Rack and Pinion Boot
2010 Cadillac CTS Steering Angle Sensor
2010 Cadillac CTS Steering Column Cover
2010 Cadillac CTS Steering Shaft
2010 Cadillac CTS Tie Rod
2010 Cadillac CTS Tie Rod End