How to replace the rear output transfer case seal on 2009 Cadillac Escalade?

A mechanic needs to raise and support the vehicle properly before starting the process of replacement. Begin by removing the transfer case shield only when present along with the rear propeller shaft. By using a flat-tipped screwdriver you can pry out the rear output shaft seal from its position. The output shaft seal installer (J 45756) assists in installing a brand new front output shaft seal during replacement. Place back the rear propeller shaft before inspecting the fluid level and adding fluid if the level falls below the mark. Reinstall the transfer case shield when present before lowering the vehicle.

OEM 2009 Cadillac Escalade Transfer Case Seal

Transfer Case Output Shaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transfer Case Seal found

View related parts
2009 Cadillac Escalade Extension Housing Seal
Part Number: 24262196
$3.04 MSRP: $4.75
You Save: $1.71 (36%)
Product Specifications
- Other Name: Gasket-Automatic Transmission Case Extension; Automatic Transmission Extension Housing Seal; Transmission Seal; Gasket, Transmission Extension
- Replaces: 29544371
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.3 x 8.3 x 0.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 24262196
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac Escalade Submodels:
- Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

2009 Cadillac Escalade Transfer Case Seal

With a comprehensive array of OEM 2009 Cadillac Escalade Transfer Case Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac Escalade Transfer Case Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac Escalade Parts Questions & Experts Answers

Q: How to replace the rear output transfer case seal on 2009 Cadillac Escalade?
A: A mechanic needs to raise and support the vehicle properly before starting the process of replacement. Begin by removing the transfer case shield only when present along with the rear propeller shaft. By using a flat-tipped screwdriver you can pry out the rear output shaft seal from its position. The output shaft seal installer (J 45756) assists in installing a brand new front output shaft seal during replacement. Place back the rear propeller shaft before inspecting the fluid level and adding fluid if the level falls below the mark. Reinstall the transfer case shield when present before lowering the vehicle.