Other Name: Seal, Transfer Case Input Shaft; Automatic Transmission Transfer Shaft Seals; Transfer Case Input Shaft Seal; Input Shaft Seal; Seal, Transfer Case
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
Other Name: Gasket-Automatic Transmission Case Extension; Automatic Transmission Extension Housing Seal; Transmission Seal; Gasket, Transmission Extension
Replaces: 29544371
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
Cadillac Escalade Transfer Case Seal
Our website offers an extensive catalog of genuine Cadillac Escalade Transfer Case Seal at unbeatable prices. Every OEM Cadillac Escalade Transfer Case Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Cadillac Escalade Transfer Case Seal Parts Questions & Experts Answers
Q: How to replace the front output transfer case seal on Cadillac Escalade?
A: Vehicle support and correct vehicle lifting should start the replacement process for the front output shaft seal. Use a practical tool to remove the transfer case shield before uninstalling the front propeller shaft. The front output shaft seal consists of two interlocking parts which have the force-fitting inner component attached to the front output shaft. A flat-tipped screwdriver should be placed behind the inner race of the seal to pry it forward in order to remove the front output shaft seal. A small pry bar should be used to advance the inner seal race which sits on the front output shaft before the seal can be taken out. A combination of flat-tipped screwdriver or small pry bar should be inserted into the transfer case-between the outer race of the seal and its lip to correctly remove the output shaft seal. The installation procedure requires you to fasten the output shaft seal installer (J 43484) to the driver handle (J 8092) while adding a new seal to this assembly. Attach both tools to the seal before its installation. Installation of the front propeller shaft should precede fluid level inspection and fluid top off if needed. Finish by installing the transfer case shield if present and then lower the vehicle.