Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 23049636
Extension Housing Seal, Rear

1995-2007 GM

Customer Questions & Expert Answers (18)
GM 23049636 Extension Housing Seal, Rear
GM 23049636 Extension Housing Seal, Rear
GM 23049636 Extension Housing Seal, Rear
  • Part Description
    Seal, Rear Bearing Retaining; Manual Transmission Extension Housing Seal and Gasket Set.
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, WBH, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1995-2005 Chevrolet BlazerBase, LS, LT, Trailblazer, ZR26 Cyl 4.3 L GAS
    1995-2004 Chevrolet S10Base, LS, ZR2, ZR54 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
    1999-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 23049636 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 23049636 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the transfer case input shaft seal for the 2003 Cadillac Escalade? Posted by Customer
    A:
    First, remove the transfer case.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What should be done after installing the new seals for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Reinstall the rear propeller shaft, check the fluid level and add fluid if necessary, and then reinstall the transfer case shield if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How do you remove the rear output shaft bushing if necessary for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Use the Transfer Case Rear Bushing Remover and Installer (J45380) by installing the finger section in front of the bushing, attaching the tube and forcing screw, ensuring the forcing screw is backed out, and then using a wrench on the forcing screw to remove the bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How do you remove the rear output shaft bushing if necessary for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Use the Transfer Case Rear Bushing Remover and Installer (J 45380) by installing the finger section in front of the bushing, attaching the tube and forcing screw, and then using a wrench to remove the bushing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What are the final steps after installing the seal for the 2005 Chevrolet Blazer? Posted by Customer
    A:
    Reinstall the front output shaft dust seal, attach the front propeller shaft to the transfer case, check the transfer case fluid level, reattach the transfer case shield, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What is the first step in the installation process for the 2002 Chevrolet S10? Posted by Customer
    A:
    Place the Front Output Shaft Seal Protector (J 44636-2) on the transfer case front output shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How should the new input shaft seal be installed for the 2002 Chevrolet S10? Posted by Customer
    A:
    Ensure that the part numbers on the seal are facing outward toward the technician.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What should be checked after the installation of the seal for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Check the transfer case oil level and add oil as necessary.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What is the method to remove the outer part of the seal for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Insert a flat-tipped screwdriver or small pry bar between the outer race of the seal and the transfer case to remove the outer part of the seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What is the final step after reinstalling components for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What is the final step after reinstalling the transfer case assembly for the 2001 GMC Jimmy? Posted by Customer
    A:
    Check the level of the transfer case fluid and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What should be done after installing the front output shaft seal for the 2001 GMC Jimmy? Posted by Customer
    A:
    Remove both the installer and protector from the output shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    How do you install the seal for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Install the seal onto the Output Shaft Seal Installer (J 43484) using both tools, then reinstall the front propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What should be done to the seal mating surfaces before installation for the 2000 GMC Jimmy? Posted by Customer
    A:
    Lubricate the seal mating surfaces with Dexron III oil (GM P/N12346143).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What is the first step to replace the rear transfer case output shaft seal for the 2004 GMC Sonoma? Posted by Customer
    A:
    First, raise the vehicle and remove the transfer case shield, followed by the rear propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    What is the first step to replace the rear transfer case output shaft seal for the 2003 GMC Sonoma? Posted by Customer
    A:
    Raise the vehicle and remove the transfer case shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    Q:
    Which tool is used after creating a hole in the seal for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    The Output Shaft Oil Seal Remover (J 36825) is used next.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Transfer Case Seal
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Extension Housing Seal, Rear 23049636 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 23049636 Extension Housing Seal, Rear is available in the market under the name GM Transfer Case Seal, Transmission Gasket, Automatic Transmission Seal. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 23049636 Extension Housing Seal, Rear fits certain Chevrolet S10, Tahoe, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade and Oldsmobile Bravada models.
The original GM component designated by manufacturer part number 23049636 maintains top performance when functioning as the Seal, Rear Bearing Retaining; Manual Transmission Extension Housing Seal and Gasket Set. unit at its Rear. The component 23049636 is constructed from durable material and its dimensions span 7.0 x 2.3 x 1.4 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Seal, Transmission Rear Main Bearing; Seal, Transmission Extension. The part 23049636 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.