Other Name: Seal, Automatic Transmission Case Extension; Output Shaft Seal; Transfer Case Gasket.; Output Shaft Seal; Extension Housing Seal; Transmission Rear Main Bearing; Rear Bearing Retaining; Transfer Case Seal
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1984-1991 GMC Jimmy | Base, High Sierra, Sierra Classic | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
Other Name: Seal, Auto Transmission Case Extension; Manual Transmission Housing Seal; Gasket Set; Transfer Case Gasket.; Extension Seal; Seal, Transmission Rear Main Bearing; Seal, Transmission Extension
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1992-1994 GMC Jimmy | Base, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
Other Name: Seal, Transfer Case Input Shaft; Transfer Case Gasket; Seal, Transfer Case
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1995-1999 GMC Jimmy | Base, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
GMC Jimmy Transfer Case Seal
Our website offers an extensive catalog of genuine GMC Jimmy Transfer Case Seal at unbeatable prices. Every OEM GMC Jimmy Transfer Case Seal comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
GMC Jimmy Transfer Case Seal Parts Questions & Experts Answers
Q: How to replace the front output transfer case seal on GMC Jimmy?
A: The procedure begins with vehicle elevation and shield and front propeller shaft removal. Then the transfer case output shaft dust seal must be extracted along with the transfer case front output shaft seal. Begin by removing both the seal that protects the front output shaft dust and the front output shaft seal itself. The front output shaft seal protector (J 44636-2) goes onto the front output shaft of the transfer case after which the front output shaft seal can be mounted on the protector. The front output shaft seal installer (J 44636-1) should be utilized to appropriately set the front output shaft seal before both components are extracted from the output shaft. The front output shaft dust seal installation must be followed by front propeller shaft attachment to the transfer case then verifying transfer case fluid levels and reinstalling the transfer case shield before slowly lowering the vehicle.