How to replace the Automatic Transmission Range Selector Shift Cable on Cadillac Escalade?

The first step for Shift Cable replacement requires positioning the Steering Column shift lever to park position followed by instrument panel knee bolster and driver seat removal. The first task includes pulling back carpet and insulation from the driver side while removing the retainer that holds the cable to the Steering Column. When replacing the Shift Cable users must detach the cable end from the Steering Column ball stud while depressing the tangs to disengage the cable from the Steering Column bracket and must keep the Shift Cable free from unnecessary bending or twisting. Eliminate the Shift Cable from both the support and the cable grommet of the floor panel. The operator should first raise and support the vehicle and then detach the clips securing the cable to the floor panel reinforcement while the manual transmission shaft rests in mechanical park position. Removal of cable clip on the Transfer Case then separation of Shift Cable from transmission range selector lever ball stud is necessary for equipped vehicles. After removing the bracket-retaining retainer you should depress the tangs of the cable to extract it from the bracket and place the Shift Cable outside the vehicle. Install the Shift Cable on the vehicle while maintaining manual transmission shaft lever at mechanical park. The Shift Cable receives installation on the bracket before use of the retainer for cable fixation. Connect the Shift Cable end to the ball stud of the selector lever after installing the cable clip to the Transfer Case if equipped. You must instantly attach the cable clips to the floor panel reinforcement and until the vehicle reaches ground level while the Steering Column shift lever stays in the park position. Install the cable grommet to the floor panel positioning it correctly before securing the cable to its support and Steering Column bracket where tang engagement should be complete. After attaching the cable end to the Steering Column ball stud install the retainer on the Steering Column before moving forward with reinstallation of carpet and insulation near the driver area followed by driver seat installation and instrument panel knee bolster. Check the transmission shift function while also adjusting the cable to reach every operating position.

OEM Cadillac Escalade Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Shift Cables found

View related parts
Cadillac Escalade Shift Control Cable
Part Number: 20787607
$85.00 MSRP: $145.98
You Save: $60.98 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 20787606
$41.78 MSRP: $71.12
You Save: $29.34 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 20787609
$40.88 MSRP: $67.92
You Save: $27.04 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 20787608
$57.76 MSRP: $97.00
You Save: $39.24 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 84507731
$57.39 MSRP: $97.70
You Save: $40.31 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23258955
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 84867183
$31.98 MSRP: $52.68
You Save: $20.70 (40%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaced by: 86532014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 19177020
$40.91 MSRP: $64.09
You Save: $23.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaces: 15945097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 84525959
$44.59 MSRP: $65.50
You Save: $20.91 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 22893848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 84507732
$46.33 MSRP: $68.96
You Save: $22.63 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 84271572
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 20787612
$53.49 MSRP: $79.62
You Save: $26.13 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV)
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 19434392
$35.85 MSRP: $57.94
You Save: $22.09 (39%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 84868716, 25995564
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 84525957
$57.39 MSRP: $97.70
You Save: $40.31 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23258956, 22893849
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 84507729
$50.62 MSRP: $80.37
You Save: $29.75 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23174589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Parking Brake Cable
Part Number: 26082803
Product Specifications
- Other Name: Cable, Automatic Transmission Parking Lock; Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Shift Control Cable
Part Number: 19207880
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Cadillac Escalade | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

Cadillac Escalade Shift Cable

Our website offers an extensive catalog of genuine Cadillac Escalade Shift Cable at unbeatable prices. Every OEM Cadillac Escalade Shift Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade Shift Cable Parts Questions & Experts Answers

Shift Control Cable
20787606
Q: How to replace the Automatic Transmission Range Selector Shift Cable on Cadillac Escalade?
A: The first step for Shift Cable replacement requires positioning the Steering Column shift lever to park position followed by instrument panel knee bolster and driver seat removal. The first task includes pulling back carpet and insulation from the driver side while removing the retainer that holds the cable to the Steering Column. When replacing the Shift Cable users must detach the cable end from the Steering Column ball stud while depressing the tangs to disengage the cable from the Steering Column bracket and must keep the Shift Cable free from unnecessary bending or twisting. Eliminate the Shift Cable from both the support and the cable grommet of the floor panel. The operator should first raise and support the vehicle and then detach the clips securing the cable to the floor panel reinforcement while the manual transmission shaft rests in mechanical park position. Removal of cable clip on the Transfer Case then separation of Shift Cable from transmission range selector lever ball stud is necessary for equipped vehicles. After removing the bracket-retaining retainer you should depress the tangs of the cable to extract it from the bracket and place the Shift Cable outside the vehicle. Install the Shift Cable on the vehicle while maintaining manual transmission shaft lever at mechanical park. The Shift Cable receives installation on the bracket before use of the retainer for cable fixation. Connect the Shift Cable end to the ball stud of the selector lever after installing the cable clip to the Transfer Case if equipped. You must instantly attach the cable clips to the floor panel reinforcement and until the vehicle reaches ground level while the Steering Column shift lever stays in the park position. Install the cable grommet to the floor panel positioning it correctly before securing the cable to its support and Steering Column bracket where tang engagement should be complete. After attaching the cable end to the Steering Column ball stud install the retainer on the Steering Column before moving forward with reinstallation of carpet and insulation near the driver area followed by driver seat installation and instrument panel knee bolster. Check the transmission shift function while also adjusting the cable to reach every operating position.

Related Cadillac Escalade Parts

Browse Cadillac Escalade Shift Cable by Years

2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002