OEM 2009 Cadillac SRX Battery Cable

Car Battery Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Battery Cables found

  • 2009 Cadillac SRX Battery Cable Diagram - 25831922
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Positive; Battery Cables; Cable, Battery(Positive)
    • Item Weight: 3.10 Pounds
    • Item Dimensions: 4.0 x 12.5 x 10.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25831922
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS
  • 2009 Cadillac SRX Battery Cable Diagram - 25848942
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Ground(Negative)
    • Item Weight: 3.00 Pounds
    • Item Dimensions: 4.1 x 12.5 x 10.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25848942
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac SRX Submodels:
    • Base | 6 Cyl 3.6 L GAS
  • 2009 Cadillac SRX Battery Cable - 25848936
    2009 Cadillac SRX Battery Cable Diagram - 25848936
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Positive; Battery Cables; Cable, Battery(Positive)
    • Item Weight: 2.30 Pounds
    • Item Dimensions: 4.2 x 12.4 x 10.4 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25848936
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac SRX Submodels:
    • Base | 8 Cyl 4.6 L GAS
  • 2009 Cadillac SRX Battery Cable - 25848940
    2009 Cadillac SRX Battery Cable Diagram - 25848940
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Battery Negative; Battery Cables; Ground Strap; Cable, Battery Ground(Negative)
    • Item Weight: 2.80 Pounds
    • Item Dimensions: 12.0 x 9.9 x 4.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 25848940
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2009 Cadillac SRX Submodels:
    • Base | 8 Cyl 4.6 L GAS

2009 Cadillac SRX Battery Cable

With a comprehensive array of OEM 2009 Cadillac SRX Battery Cable, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Battery Cable are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac SRX Battery Cable Parts and Q&A

  • Q: How to replace the positive battery cable on 2009 Cadillac SRX?
    A: Start the replacement process of the battery positive cable by disconnecting the negative terminal of the battery. The lever on the battery clamp needs to be rotated for detachment followed by removal of the battery positive cable from the battery. Begin by removing the electrical center cover through its tabs. After that disconnect the battery positive cable from its electrical center nut. During the procedure raise and support the vehicle and move the protective boot from the generator output bat terminal to gain access. Disassemble the generator output bat terminal nut then disconnect its positive battery lead from the generator assembly. First detach the Starter terminal nut before taking the battery positive cable from both the Starter and Starter. Finally remove the cable from the engine. The procedure for installation starts by putting the battery positive cable in contact with the engine and afterward attaching it to the Starter before tightening the Starter terminal nut at 13 nm (115 lb in). Connect the positive lead of the battery to the generator before installing its bat terminal nut and torquing it to 13 nm (115 lb in). Put on the protective boot to the generator output bat terminal then drop the vehicle before installing the nut that connects the battery positive cable to the underhood fuse block with a torque of 15 nm (11 lb ft). Proceed by installing the electrical center cover then joining the battery positive cable to the battery followed by widgeting the battery clamp lever and reunifying the battery negative cable.

Related 2009 Cadillac SRX Parts