OEM 2009 Cadillac SRX Fuel Filler Hose

2009 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace the fuel filler hose on 2009 Cadillac SRX?

  A: To perform the replacement of the Fuel Filler Hose start by draining the Fuel Tank to a level beneath the hose attachment point and then remove the fuel filler cap. To start replace the Fuel Filler Hose you must first disconnect the bolts joining the body to the tube and afterwards remove the right rear wheel and the rear bumper fascia. Begin by taking out the fuel filler tube brace bolt and disconnecting the Fuel Filler Hose from the Fuel Tank and afterward disconnect the filler vent tube from the evaporative emission (EVAP) hose. After finishing all installation steps you should take out the fuel filler tube from your vehicle. Position the fuel filler tube while connecting the filler hose to the Fuel Tank and tighten the fuel filler tube hose clamp to 3.5 nm (31 lb in). After attaching the filler vent tube to the evap hose you must install and tighten the fuel filler tube brace bolt to 9 nm (80 lb in). The fuel filler tube needs to be fastened to the body while tightening it to 3.5 nm (31 lb in), with the rear bumper fascia and right rear wheel installed after. Before closing up you should check for leaks then refuel the tank before reinstalling the fuel filler cap.