How to replace the fuel filler hose on 2010 Cadillac SRX?

The replacement process of the fuel tank filler pipe begins by draining the fuel tank if required. Housing fasteners must be removed in addition to the right rear wheelhouse panel liner. You need to disconnect the evaporative emission line before removing the lower filler tube fastener. Start by loosening the clamp securing the hose connected to the filler pipe and afterward remove the hose along with the upper fastener of the filler tube until the complete pipe removal is achieved. Position the filler pipe into place before securing it with a center nut by hand. Theclamp securing the filler pipe hose needs to be tightened until it reaches 5 Nm (44 lb in). Fasten the lower filler pipe with hand force while adding the evaporative emission line. Install the housing fasteners with a torque of 10 Nm (89 lb in) and fasten these fixtures to 10 Nm (89 lb in torques). You should reinstall the right rear wheelhouse panel liner as the last step.

OEM 2010 Cadillac SRX Fuel Filler Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fuel Filler Hoses found

View related parts
2010 Cadillac SRX Filler Hose
Part Number: 20765536
$11.70 MSRP: $18.31
You Save: $6.61 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Fuel Tank Filler; Fuel Filler Hose
- Item Weight: 1.80 Pounds
- Item Dimensions: 6.8 x 2.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20765536
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac SRX Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
2010 Cadillac SRX Filler Neck
Part Number: 22742093
$76.59 MSRP: $115.69
You Save: $39.10 (34%)
Product Specifications
- Other Name: Pipe Assembly-Fuel Tank Filler (W/Filler Hose); Fuel Tank Filler Neck; Fuel Filler Hose; Filler Pipe; Pipe, Fuel Tank Filler
- Replaces: 20850557
- Item Weight: 2.30 Pounds
- Item Dimensions: 43.3 x 11.1 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22742093
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac SRX Submodels:
- Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2010 Cadillac SRX Fuel Filler Hose

With a comprehensive array of OEM 2010 Cadillac SRX Fuel Filler Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac SRX Fuel Filler Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac SRX Parts Questions & Experts Answers

Q: How to replace the fuel filler hose on 2010 Cadillac SRX?
A: The replacement process of the fuel tank filler pipe begins by draining the fuel tank if required. Housing fasteners must be removed in addition to the right rear wheelhouse panel liner. You need to disconnect the evaporative emission line before removing the lower filler tube fastener. Start by loosening the clamp securing the hose connected to the filler pipe and afterward remove the hose along with the upper fastener of the filler tube until the complete pipe removal is achieved. Position the filler pipe into place before securing it with a center nut by hand. Theclamp securing the filler pipe hose needs to be tightened until it reaches 5 Nm (44 lb in). Fasten the lower filler pipe with hand force while adding the evaporative emission line. Install the housing fasteners with a torque of 10 Nm (89 lb in) and fasten these fixtures to 10 Nm (89 lb in torques). You should reinstall the right rear wheelhouse panel liner as the last step.