OEM 2010 Cadillac SRX Fuel Tank

2010 Cadillac SRX Fuel Tank Parts and Q&A

• Q: How to Replace the Primary Fuel Tank Module in China on 2010 Cadillac SRX?

  A: A vehicle technician must disconnect Fuel Tank electrical connectors between both the primary and secondary Fuel Tank modules before removing the primary module. The next step requires the user to detach fuel and evaporative emission lines before removing the secondary Fuel Pump module. The ch 45722 (Fuel Tank Sender Wrench) allows you to remove the cam lock ring which should be undone counterclockwise and afterward you can remove the primary Fuel Tank module as well as the o-ring . A Fuel Pump replacement needs the removal of the primary Fuel Level Sensor unless the primary module exists alone. The installer should follow these steps when changing only the Fuel Pump module: first set the primary Fuel Level Sensor in place then add a new o-ring followed by the primary Fuel Tank module. Turn the ch 45722 (Fuel Tank Sender Wrench) to clockwise direction to install the cam lock ring before putting back the secondary Fuel Pump module. Reinstall the electrical connectors which connect to the primary and secondary Fuel Tank modules then join the fuel and evaporative emission lines. Finally, reinstall the Fuel Tank.