OEM 2009 Cadillac SRX Fuse Box

2009 Cadillac SRX Parts Questions & Experts Answers

• Q: How to replace the underhood fuse box on 2009 Cadillac SRX?

  A: The process of replacing an underhood electrical center or junction box requires a first step of disconnecting the negative Battery Cable. Begin by taking out the electrical center cover followed by the fastener holding the positive cable to the electrical center. Detach the electrical connector then remove the fasteners which secure the electrical center board. Unlock the locking tabs on the electrical center board before lifting it up while pulling the harness at the tabs to remove it. Securely fasten the electrical center (1, 2) to the car by using fasteners. Hook the electrical center to the vehicle by using fasteners (1, 2) and adjust them to 10 nm (86 lb in). The electrical center board should be fastened at its locking tabs and tightened to 7 nm (62 lb in) while the harness connects. Utilize the 15 nm torque (11 lb ft) to tighten the positive cable fastener which joins the electrical center before putting on the electrical center cover. The last step of the procedure requires Battery Cable reconnection.