OEM 2009 Chevrolet Aveo Shift Cable

2009 Chevrolet Aveo Shift Cable Parts Questions & Experts Answers

• Q: How to replace the shift cable on 2009 Chevrolet Aveo?

  A: The process of replacing the shift control cable starts by disassembling the Air Hose between the air cleaner and Throttle Body yet keeping gas safety in mind. Begin by taking out the vehicle battery and then disconnect the transaxle side select and shift control cable pins as well as the washers. Detach the select and shift control cable followed by extraction of cable e-rings until the cables can be disconnected from the cable bracket. For access to the gear Shift Cable the floor console should be taken away while moving the floor carpet. Strip the process by first proceeding to remove the shift lever side select u-coil along with the eye ring and select control e-ring before the select control cable can be disconnected. Disassemble the shift control cable pin and its e-ring before extracting the shift control cable together with the select and shift control cable nuts toward the passenger area. The cable routing during assembly should be directed toward the engine compartment through the dash panel before installation on the select and shift lever. Connect all the shift and select control cables that originate from the transaxle compartment while simultaneously attaching the gear shift lever side control cable. The gear shift select control cable eye ring must be placed into the select arm pin before installing the gear shift selector lever control cable clip. The e-ring allows securing the gear shift select control cable to the gear shift lever bracket while using a screwdriver in the select arm adjustment hole to maintain neutral position of the gear shift lever. Connect the gear shift lever side select control cable twice before reinstalling the floor console. Tighten the adjust nut of the gear cable to 10 nm (89 lb in). Install the battery together with the Air Hose to their respective places within the air cleaner and Throttle Body.