How to replace the Windshield Washer Pump on 2009 Chevrolet Aveo?

Begin replacement of the windshield Washer Pump by taking the negative Battery Cable off. First detach the left front wheel then remove the screws holding the front wheel well splash shield. Remove the Washer Pump by disconnecting its electric wiring and sealing hose. Begin assembly by placing the new Washer Pump into place before you add both the washer hose and electrical connector to it. Secure the front wheel well splash shield with its screws and tighten them to 1.5 nm (13 lb in). Reattach the front left wheel before joining the battery terminal.

OEM 2009 Chevrolet Aveo Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2009 Chevrolet Aveo Washer Pump
Part Number: 96397517
Product Specifications
- Other Name: Pump, Rear Window Wiper; Washer Pump Repair Kit; Windshield Washer Pump; Pump, Windshield Washer Pump
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96397517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2009 Chevrolet Aveo Washer Pump

With a comprehensive array of OEM 2009 Chevrolet Aveo Washer Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Aveo Washer Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Aveo Washer Pump Parts Questions & Experts Answers

Q: How to replace the Windshield Washer Pump on 2009 Chevrolet Aveo?
A: Begin replacement of the windshield Washer Pump by taking the negative Battery Cable off. First detach the left front wheel then remove the screws holding the front wheel well splash shield. Remove the Washer Pump by disconnecting its electric wiring and sealing hose. Begin assembly by placing the new Washer Pump into place before you add both the washer hose and electrical connector to it. Secure the front wheel well splash shield with its screws and tighten them to 1.5 nm (13 lb in). Reattach the front left wheel before joining the battery terminal.

Related 2009 Chevrolet Aveo Parts

Alternate Year Models

2008 Chevrolet Aveo Washer Pump 2010 Chevrolet Aveo Washer Pump