How to replace the Windshield Washer Pump on 2010 Chevrolet Aveo?

Begin your windshield Washer Pump replacement work by disconnecting the negative Battery Cable. First unscrew and remove both parts from the left front wheel. Take off the Washer Pump after disconnecting its electrical connector and washer hose. Insert the new Washer Pump and connect its electrical connection and draining tube in this order. Mount the front wheel well splash shield using its screws and tighten them to 1.5 nm (13 lb in). Put back the front left wheel and attach the negative battery wire.

OEM 2010 Chevrolet Aveo Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2010 Chevrolet Aveo Washer Pump
Part Number: 96397517
Product Specifications
- Other Name: Pump, Rear Window Wiper; Washer Pump Repair Kit; Windshield Washer Pump; Pump, Windshield Washer Pump
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96397517
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Washer Pump

With a comprehensive array of OEM 2010 Chevrolet Aveo Washer Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Washer Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Parts Questions & Experts Answers

Q: How to replace the Windshield Washer Pump on 2010 Chevrolet Aveo?
A: Begin your windshield Washer Pump replacement work by disconnecting the negative Battery Cable. First unscrew and remove both parts from the left front wheel. Take off the Washer Pump after disconnecting its electrical connector and washer hose. Insert the new Washer Pump and connect its electrical connection and draining tube in this order. Mount the front wheel well splash shield using its screws and tighten them to 1.5 nm (13 lb in). Put back the front left wheel and attach the negative battery wire.

Related 2010 Chevrolet Aveo Parts

Alternate Year Models

2009 Chevrolet Aveo Washer Pump 2011 Chevrolet Aveo Washer Pump