How to replace the intake camshaft position sensor on 2009 Chevrolet Cobalt?

The first step for intake camshaft position (CMP) sensor replacement requires removing the intake manifold cover. The CMP sensor electrical connector needs disconnecting followed by the removal of the CMP sensor bolt and sensor. Roughly a quarter-millimeter of clearance exists between two sprocket surfaces. Tightening torque should be applied directly after meshing these surfaces. Initialization will occur within a couple seconds to a few minutes. Before installation, inspect the CMP sensor for damage and replace it if necessary. Apply clean engine oil on the CMP sensor O-ring seal before installing the CMP sensor. Route the CMP sensor bolt into position before tightening it to 10 Nm (89 lb in). Reinstall the intake manifold cover after you reconnect the intake CMP sensor electrical connector and install the CMP sensor along with its bolt.

OEM 2009 Chevrolet Cobalt Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Camshaft Position Sensors found

View related parts
2009 Chevrolet Cobalt Camshaft Position Sensor
Part Number: 12584079
$70.77 MSRP: $132.06
You Save: $61.29 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Position Sensor; Crankshaft Sensor
- Replaces: 12571266
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.5 x 6.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12584079
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2009 Chevrolet Cobalt Camshaft Position Sensor, Green Line
Part Number: 12674704
$44.31 MSRP: $90.00
You Save: $45.69 (51%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12577245
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 2.5 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12674704
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2009 Chevrolet Cobalt Camshaft Position Sensor

With a comprehensive array of OEM 2009 Chevrolet Cobalt Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to replace the intake camshaft position sensor on 2009 Chevrolet Cobalt?
A: The first step for intake camshaft position (CMP) sensor replacement requires removing the intake manifold cover. The CMP sensor electrical connector needs disconnecting followed by the removal of the CMP sensor bolt and sensor. Roughly a quarter-millimeter of clearance exists between two sprocket surfaces. Tightening torque should be applied directly after meshing these surfaces. Initialization will occur within a couple seconds to a few minutes. Before installation, inspect the CMP sensor for damage and replace it if necessary. Apply clean engine oil on the CMP sensor O-ring seal before installing the CMP sensor. Route the CMP sensor bolt into position before tightening it to 10 Nm (89 lb in). Reinstall the intake manifold cover after you reconnect the intake CMP sensor electrical connector and install the CMP sensor along with its bolt.