How to replace the ignition coil on 2009 Chevrolet Cobalt?

To change the ignition coil, you are supposed to ensure that the ignition key is off. Remove the intake manifold cover. Pull off the ignition coil(s) electrical connector(s), next to unfasten the ignition coil bolt(s), and then unfasten the ignition coil(s). For the installation, reinstall the ignition coil(s) in place, and follow the fasteners caution to avoid damage to the vehicle. Put the ignition coil bolt(s) and tighten it to 10 Nm (89 lb in). Connect back the ignition coil eletrical connnectors and re-install the intake cover.

OEM 2009 Chevrolet Cobalt Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2009 Chevrolet Cobalt Ignition Coil, Green Line Part Number: 12638824
$43.33 MSRP: $76.08
You Save: $32.75 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly-Ignition; Direct Ignition Coil; Coil; Coil, Ignition Coil
- Replaced by: 25206788
- Replaces: 12629646, 12578224
- Item Weight: 0.90 Pounds
- Item Dimensions: 8.4 x 3.2 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 4
- SKU: 12638824
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2009 Chevrolet Cobalt Ignition Coil

With a comprehensive array of OEM 2009 Chevrolet Cobalt Ignition Coil, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Ignition Coil are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Ignition Coil Parts and Q&A

Q: How to replace the ignition coil on 2009 Chevrolet Cobalt?
A: To change the ignition coil, you are supposed to ensure that the ignition key is off. Remove the intake manifold cover. Pull off the ignition coil(s) electrical connector(s), next to unfasten the ignition coil bolt(s), and then unfasten the ignition coil(s). For the installation, reinstall the ignition coil(s) in place, and follow the fasteners caution to avoid damage to the vehicle. Put the ignition coil bolt(s) and tighten it to 10 Nm (89 lb in). Connect back the ignition coil eletrical connnectors and re-install the intake cover.