How to replace the engine oil pressure switch on 2009 Chevrolet Cobalt?

Removing the engine oil pressure switch requires the removal of the starter. Unhook the engine wiring harness by the oil pressure switch and take the switch out. Install the new switch and make sure that it is tightened. Rejoin the wiring harness and re-attach the starter.

OEM 2009 Chevrolet Cobalt Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2009 Chevrolet Cobalt Pressure Switch, Green Line Part Number: 12635992
$17.69 MSRP: $29.14
You Save: $11.45 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Oil Pressure/Temperature; Oil Pressure Sensor; Oil Pressure Switch; Oil Pressure Sending Unit
- Replaced by: 19436255
- Replaces: 12610185, 24577642
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.9 x 1.6 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635992
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

2009 Chevrolet Cobalt Oil Pressure Switch

With a comprehensive array of OEM 2009 Chevrolet Cobalt Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Cobalt Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2009 Chevrolet Cobalt?
A: Removing the engine oil pressure switch requires the removal of the starter. Unhook the engine wiring harness by the oil pressure switch and take the switch out. Install the new switch and make sure that it is tightened. Rejoin the wiring harness and re-attach the starter.