ChevyParts
My Garage
My Account
Cart
OEM 2009 Chevrolet Cobalt ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 ABS Control Modules found
2009 Chevrolet Cobalt Control Module
Part Number: 20827128$286.97 MSRP: $556.94You Save: $269.97 (49%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Modulator; Module Kit, Electronic Brake Control
- Replaces: 25911087
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.2 x 7.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20827128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Chevrolet Cobalt Control Module
Part Number: 25907526$212.62 MSRP: $384.84You Save: $172.22 (45%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.2 x 6.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25907526
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Product Specifications- Other Name: Valve Kit, Brake Pressure Mode; Modulator; Valve Kit, Electronic Brake Control
- Replaces: 25911088
- Item Weight: 6.50 Pounds
- Item Dimensions: 7.2 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19301489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 Chevrolet Cobalt ABS Control Module
With a comprehensive array of OEM 2009 Chevrolet Cobalt ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Cobalt ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 Chevrolet Cobalt Parts Questions & Experts Answers
- Q: How to Replace the ABS Control Module in a Brake Pressure Modulator Valve with JL4 on 2009 Chevrolet Cobalt?A: Before starting the bpmv replacement with jl4 the ignition should be set to off to safeguard against ebcm/ebtcm harm. The ecm and tcm cover should be removed for cleaning before the ebcm and bpmv area. The installation process begins by unconnecting both electrical ebcm and brake pipe fittings of the bpmv and by sealing each fitting with a cap while also plugging the bpmv ports to avoid fluid leakage and contamination. Pull the bpmv straight up by removing its bolt from the bracket insulators without prying into the accumulator covers. The installation of new bpmv requires installation and replacement of ebcm and fresh o-ring seals. Insert the mounting pins fully into the bpmv then fasten it with the bpmv bolt at 11 nm torque (97 lb in). Screw in the brake pipe assembly by connecting primary to secondary master cylinder pipes as well as front and rear left and right fittings to 19 nm force (14 lb ft torque). Replace the ecm and tcm covers after the electrical connector reinstallation to the ebcm while performing a hydraulic brake system bleed. Conclude the process by checking the system diagnosis and evaluating the brake pedal resistance. A soft brake pedal needs the antilock brake system automated bleed procedure.
Related 2009 Chevrolet Cobalt Parts
2009 Chevrolet Cobalt Oxygen Sensor
2009 Chevrolet Cobalt Brake Light Switch
2009 Chevrolet Cobalt MAP Sensor
2009 Chevrolet Cobalt Seat Belt
2009 Chevrolet Cobalt TPMS Sensor
2009 Chevrolet Cobalt Antenna Cable
2009 Chevrolet Cobalt Fuse
2009 Chevrolet Cobalt Hazard Warning Switch
2009 Chevrolet Cobalt Occupant Detection Sensor
2009 Chevrolet Cobalt Seat Heater Pad
2009 Chevrolet Cobalt Spark Plug
2009 Chevrolet Cobalt Speedometer