How to Replace the ABS Control Module on 2010 Chevrolet Cobalt?

The installation process for part number jl4 ABS Control Module requires setting the ignition switch to off before beginning due to risks for damage to ABS Control Module. To begin start by removing the ecm and tcm covers and clean the dirt near the ABS Control Module that extends to the bpmv. Disconnect the electric connector from the ABS Control Module before removing its bolts. Refrain from pulling components as you set the ABS Control Module apart from the bpmv while also removing 12 ABS Control Module o-ring seals that need disposal in case of new ABS Control Module replacement. To install the new ABS Control Module, first place the 12 ABS Control Module o-ring seals on the device and afterward gently mount the ABS Control Module onto the bpmv using proper fastener procedures. Screw the ABS Control Module bolts into place while tightening them to 3 nm (27 lb in). Return the ABS Control Module electrical connector to its place while replacing the ecm and tcm cover on top. New ABS Control Module installation requires programming the unit based on essential setup and programming processes.

OEM 2010 Chevrolet Cobalt ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Control Modules found

View related parts
2010 Chevrolet Cobalt Control Module
Part Number: 20827128
$286.97 MSRP: $556.94
You Save: $269.97 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Modulator; Module Kit, Electronic Brake Control
- Replaces: 25911087
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.2 x 7.3 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20827128
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
2010 Chevrolet Cobalt Control Module
Part Number: 25907526
$212.62 MSRP: $384.84
You Save: $172.22 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.2 x 6.4 x 10.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25907526
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
2010 Chevrolet Cobalt Modulator Valve
Part Number: 19301489
Product Specifications
- Other Name: Valve Kit, Brake Pressure Mode; Modulator; Valve Kit, Electronic Brake Control
- Replaces: 25911088
- Item Weight: 6.50 Pounds
- Item Dimensions: 7.2 x 6.3 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19301489
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS

2010 Chevrolet Cobalt ABS Control Module

With a comprehensive array of OEM 2010 Chevrolet Cobalt ABS Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Cobalt ABS Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Cobalt Parts Questions & Experts Answers

Q: How to Replace the ABS Control Module on 2010 Chevrolet Cobalt?
A: The installation process for part number jl4 ABS Control Module requires setting the ignition switch to off before beginning due to risks for damage to ABS Control Module. To begin start by removing the ecm and tcm covers and clean the dirt near the ABS Control Module that extends to the bpmv. Disconnect the electric connector from the ABS Control Module before removing its bolts. Refrain from pulling components as you set the ABS Control Module apart from the bpmv while also removing 12 ABS Control Module o-ring seals that need disposal in case of new ABS Control Module replacement. To install the new ABS Control Module, first place the 12 ABS Control Module o-ring seals on the device and afterward gently mount the ABS Control Module onto the bpmv using proper fastener procedures. Screw the ABS Control Module bolts into place while tightening them to 3 nm (27 lb in). Return the ABS Control Module electrical connector to its place while replacing the ecm and tcm cover on top. New ABS Control Module installation requires programming the unit based on essential setup and programming processes.