How to replace the ABS Control Module on Chevrolet Cobalt?

The first step to replace the ABS Control Module (ABSCM) requires setting the ignition switch to OFF to protect the ABSCM and EBTCM from harm. The removal of throttle body air snorkel must be done when RPO LSJ is active. Wipe down all surfaces around both the ABSCM and BPMV to complete the area of any present debris and dust. Remove the ABSCM through disconnecting its electrical connector along with its 4 ABSCM-to-BPMV retention bolts. The ABSCM must be detached from the BPMV while keeping away metal tools that could scratch mating surfaces. Denatured alcohol should clean the ABSCM mating area on the BPMV before the ABSCM to BPMV seal receives proper installation. Follow the electrical terminal alignment of the ABSCM before tightening the 4 bolts crosswise to 4.5 Nm (40 inch lbs.). The electrical connector should go back to the ABSCM and you should also install the throttle body air snorkel again if needed. A new ABSCM installation requires programming of the system. For the final step turn on your ignition switch while maintaining the engine off then proceed with running the Diagnostic System Check - Vehicle.

OEM Chevrolet Cobalt ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 ABS Control Modules found

View related parts
Chevrolet Cobalt Control Module
Part Number: 20827128
$286.97 MSRP: $556.94
You Save: $269.97 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Modulator; Module Kit, Electronic Brake Control
- Replaces: 25911087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Control Module
Part Number: 25907526
$212.62 MSRP: $384.84
You Save: $172.22 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Control Module
Part Number: 25826700
$197.22 MSRP: $364.90
You Save: $167.68 (46%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Chevrolet Cobalt | LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Control Module
Part Number: 15870922
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Modulator; Module Kit, Electronic Brake Control
- Replaces: 15233333
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Cobalt | LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Control Module
Part Number: 15867087
Product Specifications
- Other Name: Module, Electronic Brake Control; ABS Control Module
- Replaces: 15239964
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Control Module
Part Number: 19301486
$373.81 MSRP: $670.56
You Save: $296.75 (45%)
Product Specifications
- Other Name: Valve Kit, Brake Pressure Mode; ABS Control Module; Modulator Valve; Modulator; Valve Kit, Electronic Brake Control
- Replaces: 25798971
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Chevrolet Cobalt | LS, LT, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Modulator Valve
Part Number: 19301489
Product Specifications
- Other Name: Valve Kit, Brake Pressure Mode; Modulator; Valve Kit, Electronic Brake Control
- Replaces: 25911088
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | Base, LS, LT, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Modulator Valve
Part Number: 19212185
Product Specifications
- Other Name: Valve Assembly, Brake Pressure Mode; Modulator; Valve, Electronic Brake Control
- Replaces: 15295449, 15239967
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | Base, LS, LT, LTZ, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Chevrolet Cobalt ABS Control Module

Our website offers an extensive catalog of genuine Chevrolet Cobalt ABS Control Module at unbeatable prices. Every OEM Chevrolet Cobalt ABS Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Cobalt ABS Control Module Parts Questions & Experts Answers

Control Module
15867087
Q: How to replace the ABS Control Module on Chevrolet Cobalt?
A: The first step to replace the ABS Control Module (ABSCM) requires setting the ignition switch to OFF to protect the ABSCM and EBTCM from harm. The removal of throttle body air snorkel must be done when RPO LSJ is active. Wipe down all surfaces around both the ABSCM and BPMV to complete the area of any present debris and dust. Remove the ABSCM through disconnecting its electrical connector along with its 4 ABSCM-to-BPMV retention bolts. The ABSCM must be detached from the BPMV while keeping away metal tools that could scratch mating surfaces. Denatured alcohol should clean the ABSCM mating area on the BPMV before the ABSCM to BPMV seal receives proper installation. Follow the electrical terminal alignment of the ABSCM before tightening the 4 bolts crosswise to 4.5 Nm (40 inch lbs.). The electrical connector should go back to the ABSCM and you should also install the throttle body air snorkel again if needed. A new ABSCM installation requires programming of the system. For the final step turn on your ignition switch while maintaining the engine off then proceed with running the Diagnostic System Check - Vehicle.

Related Chevrolet Cobalt Parts

Browse Chevrolet Cobalt ABS Control Module by Years

2010 2009 2008 2007 2006 2005